Step 2 : Connecting To An Amplifier/Receiver; Step 3 : Connecting To A Broadband Network - Panasonic DMP-BD75 Operating Instructions Manual

STEP 2 : Connecting to
an amplifier/receiver
Multi channel
speakers
Amplifier/receiver
≥ Set "HDMI Audio Output" to "On" (
≥ Set "Digital Audio Output" depending on the connected
amplifier/receiver ( 25).
≥ The HDMI connection supports VIERA Link "HDAVI
Control" ( 21).
≥ When using the TV or amplifier/receiver that does not
have the indication of "(ARC)" (non-ARC-compatible) on
the HDMI terminal, in order to enjoy TV's sound by
amplifier/receiver it is also required to connect the
amplifier/receiver and TV using an optical digital cable.
HDMI IN
HDMI IN
(ARC)
HDMI
cable
HDMI OUT
(ARC)
HDMI IN
HDMI
cable
26).
STEP 3 : Connecting to
a broadband network
The following services can be used when this unit is
connected to broadband.
– Firmware can be updated (
– You can enjoy BD-Live (
– You can access other devices (
For details about connection method, refer to the
instructions supplied with the connected equipment.
∫ LAN cable connection
Broadband router, etc.
≥ Use category 5 or above straight LAN cables (STP) when
connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
12)
16)
20)
LAN Cable
Internet
VQT3B11
9