Panasonic Diga DMR-ES45 Operating Instructions Manual page 56

Panasonic diga dmr-es45: operating instruction
Table of Contents

Advertisement

Transferring (Copying)
[5]
Register still pictures
for transfer (copying).
≥If you are going to transfer a
registered list without making
any changes to it, press [4],
then skip to step 6.
≥You can register still pictures or still picture folders.
≥Still pictures and folders cannot be registered on the same list.
∫ To register individual still pictures
(1)Make sure "Create List" is selected and press [1].
(2)Make sure "New Entry (Total = 0)" is selected and press
[ENTER].
(3)Press [3, 4, 2, 1] to select a still picture and press
[ENTER].
≥You can register multiple still pictures to the copying list by
repeating the above steps 2 to 3.
(Copying list display and convenient functions: l right)
≥"To show other pages" l below
≥"Multiple editing" l below
(4)Press [2].
(5)Press [4].
∫ To register on a folder by folder basis
(1)Make sure "Create List" is
selected and press [1].
(2)Press [3, 4] to select
"Picture/Folder" and press
[ENTER].
(3)Press [3, 4] to select
"Folder" and press [ENTER].
(4)Press [3, 4] to select "New Entry (Total = 0)" and press
[ENTER].
(5)Press [3, 4] to select the folder and press [ENTER].
≥You can register multiple still folders to the copying list by
repeating the above steps 4 – 5.
(Copying list display and convenient functions: l right)
≥"To show other pages" l below
≥"Multiple editing" l below
(6)Press [2].
(7)Press [4].
[6]
When you finish creating the copying list,
Make sure to select "Start Copying" and press
[ENTER].
≥For individual still pictures only
When specifying another folder as the copying destination,
select "Folder".
New folder
Folder
[7]
Select "Yes" with [
≥Transfer (copying) is started.
∫ To stop transfer (copying) in the middle
Press and hold [RETURN] for about 3 seconds or more.
∫ To return to the previous screen
Press [RETURN].
Various operations
∫ To show other pages
Press [:, SKIP] or [9, SKIP].
≥Press [3, 4, 2, 1] to select "Previous" or "Next" and press
[ENTER] to show other pages.
∫ Multiple editing
Select with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat)
Press [ENTER] to register to the list.
≥A check mark appears. Press [;, PAUSE] again to cancel.
≥Still picture or folder are registered to the copying list in
ascending order of number.
56
RQTV0141
Copy
Destination capacity: 4341MB
Cancel All
Picture
Picture/Folder
Copying Direction
No.
Size
SD card
DVD
New Entry (Total = 0)
Mode
High Speed
Picture
Create List
0
Copy
Destination capacity: 4341MB
Cancel All
Picture
Picture/Folder
Copying Direction
No.
Size
SD card
DVD
New Entry (Total = 0)
Mode
Picture
High Speed
Create List
0
001 100__DVD
002 101__DVD
003 102__DVD
-
New folder
- - -
] and press [ENTER].
2
Title Name
DRIVE
SELECT
Numeric
buttons
:, 9
3, 4, 2, 1
ENTER
SUB MENU
Title Name
µ
REC MODE
To edit the transfer (copying) list
Select the item in step 5–(3) (for a still picture) or
5–(5) (for a folder) (l left)
[1]
Select a desired item with [3, 4] and press
[SUB MENU].
Press [3, 4] to select the operation and press [ENTER].
[2]
Clear All:
Clear all items registered on the transfer (copying) list.
≥Press [2] to select "Yes" and press [ENTER].
Add:
Add new items to the transfer (copying) list.
≥Press [3, 4, 2, 1] to select the still picture or folder to be
added and press [ENTER].
Remove:
Remove the selected item.
≥Press [2] to select "Yes" and press [ENTER].
≥Multiple editing is possible. (l left)
To cancel all registered transfer (copying) settings and lists
After performing steps 1 to 2 (l 55)
[1]
Press [3, 4] to select "Cancel
All" and press [ENTER].
[2]
Press [2] to select "Yes" and
press [ENTER].
≥The settings and lists may be canceled in the following situations.
- When a title or still picture has been recorded or erased at the
transfer (copying) source.
- When steps have been taken, for instance, to turn off the unit,
remove the card, open the tray, change the copy direction, etc.
To select another folder
[1]
Press [3, 4, 2, 1] to select "Folder" and press [ENTER].
≥If you want to switch to another higher folder (l below)
[2]
Press [3, 4] to select the folder and press [ENTER].
Create List
Select pictures
SD CARD
Folder
103__DVD
0001
0002
≥You can also select folders by entering a 3-digit number
with the numeric buttons.
e.g.:
"5":
"15":
≥The still pictures of different folders cannot be registered on the
same list.
To switch to another higher folder
≥Only when selecting the source folder
If there is a multiple number of higher
folders recognizable,
While the screen on the right appears
[1]
Press [SUB MENU].
[2]
Press [3, 4] to select "Select Root Folder" and press [ENTER].
Press [2, 1] to select the higher folder and press [ENTER].
[3]
[4]
Press [3, 4] to select the desired folder and press [ENTER].
DVD/VHS
POWER
POWER
DRIVE
VOLUME
CH
TV/VIDEO
SELECT
TRACKING/V-LOCK
3
1
2
CH, W, X
CH
4
5
6
ADD/DLT
7
8
9
CH
DELETE
CANCEL
0
INPUT
INPUT SELECT
SELECT
RESET
RESET
SLOW/SEARCH
SKIP/INDEX
REW
FF
STOP
PAUSE
PLAY
1
TIME SLIP / JET REW
CM SKIP
;
ENTER
FUNCTIONS
SUB MENU
RETURN
RETURN
CREATE
AUDIO
DISPLAY
VCR/TV
CHAPTER
A
B
REC
REC MODE
STATUS
F Rec
Copy
Cancel All
Copying Direction
DVD
VHS
Mode
Press ENTER to cancel all settings.
Video
SP
\DCIM\100__DVD
001 100__DVD
002 101__DVD
0003
0004
003 102__DVD
004 103__DVD
- - -
[0] )[0] )[5]
[0] )[1] )[5]
\DCIM\100__DVD
001 100__DVD
002 101__DVD
003 102__DVD
004 103__DVD
- - -
Clear All
Add
Remove

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents