Main Unit; The Unit's Display - Panasonic Diga DMR-ES35 Operating Instructions Manual

Control reference guide

Main unit

(1)
EJECT
POWER
IN 2 S VIDEO
(6)
(1) Cassette eject button (<, EJECT) . . . . . . . . . . . . . . . . . l 22
(2) Disc tray open/close button (<, OPEN/CLOSE) . . . . . . l 22
(3) Stop button (∫). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 30, 34
(4) Play/t1.3 button (1) . . . . . . . . . . . . . . . . . . . . . . . . . l 30, 34
(5) Recording button (¥, REC) . . . . . . . . . . . . . . . . . . . . l 23, 50
(6) DVD/VHS POWER on/off button (Í/I, POWER) . . . . . . . l 16
≥To switch the unit from on to standby mode or vice versa.
In the standby mode, the unit is still consuming a small
amount of power.
(7) IN2 input terminals (IN2) . . . . . . . . . . . . . . . . . . . . . . . . . l 50
(8) DVD-SEARCH, VHS-REW/FF buttons (V/6, 5/W)
(9) Channel up/down buttons (CH, X, W). . . . . . . . . . . . . . . l 35

The unit's display

Common to DVD/VHS
[A] Recording mode indicator
DVD:
XP, SP, LP, EP: (l 24)
XP SP LP EP (all on): FR mode (l 27)
VHS:
SP, LP°, EP, VP: (l 24)
° Playback only
[B] TV indicator
≥The indicator lights during the TV mode and it goes out during
the VCR mode. You can switch the mode by using [VCR/TV].
(l 21)
[C] Main display
≥Current time
≥Disc recording and play counter
≥VHS recording and play counter
≥Transfer (Copying) messages
≥Miscellaneous messages, etc.
12
RQTV0134
Cassette compartment
CH CH
VIDEO L /MONO AUDIO R
(7) (8) (9)
(1) [A]
(2) (3)
Remote control
(2)
signal sensor
OPEN /CLOSE
SELECT
(10) (11)
The unit's display
(10) DVD/VHS drive indicator
≥Lights when the DVD or VHS drive is selected.
(11) DRIVE SELECT button
≥Drive changes each time you press [DRIVE SELECT].
(12) Connector for a digital video (DV) camcorder . . . . . . . l 50
(13) One Touch Transfer (copying) operation button
≥From VHS to DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 45
≥From DVD to VHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . l 47
[C]
VHS
(1) Scheduled recording indicator (
On:
When a scheduled recording program is registered and
recordable tape is inserted.
Flashes:
The scheduled recording indicator flashes when the unit cannot
go to scheduled recording standby (e.g. there is no tape, etc).
(2) Tape indicator
(3) Tape operation status
DVD
(1) Scheduled recording indicator (
On:
When a scheduled recording program is registered and a
recordable disc is inserted.
Flashes:
The scheduled recording indicator flashes when the unit cannot
go to scheduled recording standby (e.g. there is no disc, etc).
(2) Disc operation status
(3) Disc indicator
(3) (4) (5)
Disc tray
DRIVE
REC
COPYING COPYING
(12) (13)
[B] (1)
(2) (3)
) (l 28)
) (l 28)