Table of Contents
Advertisement
1 Video menu-Change picture quality
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›]
[VCD]
Picture
To select the picture mode during play
Normal: Default setting
Soft:
Soft picture with fewer video artifacts
Fine:
Details are sharper
Cinema: Mellows movies, enhances detail in dark scenes.
DNR
Reduces noise and picture degradation.
On()Off
°Progressive
(l 68)
Select "On" to enable progressive output.
≥Select "Off" if the picture is stretched horizontally.
≥When progressive output is on, closed captions cannot be
displayed.
On()Off
°Transfer
(When "Progressive" is set to "On")
Select the method of conversion for progressive output to suit
the type of material being played (l 68, "Film and Video").
Auto1 (normal):
Detects 24 frame-per-second film content and
appropriately converts it.
Auto2:
Compatible with 30 frame-per-second film content in
addition to 24 frame-per-second film content.
Video:
Select when the video content is distorted by using
Auto1 and Auto2.
Line-in NR
(Only when IN1, IN2 or DV is selected)
Reduces video tape noise during transfer (copy).
Depending on the software, jittering may occur.
Automatic:
Noise reduction only works on picture input from a
video tape.
On:
Noise reduction works for any video input.
Off:
Noise reduction is off. Select when you want to record
input as is.
° Only when you have selected "480p" in "TV Type" (l 18).
1 Audio menu-Change sound effect
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›]
V. Surround Sound
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›]
(Only for Dolby Digital with 2.0 or more channels)
Enjoy a surround-sound effect if you are using 2 front speakers
(L/R) only.
Natural()Emphasis()Off
^----------------------------------------J
Notes
≥Turn V. Surround Sound off if it causes distortion.
≥V. Surround Sound does not work for SAP recordings.
Dialog Enhancer
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW] [DVD-A] [DVD-V] [-RW‹VR›]
(Dolby Digital, 3-channel or over only, including a center
channel)
The volume of the center channel is raised to make dialog easier
to hear.
On()Off
1 Other menu-Change the display position
Position
To change the display position
1 (Standard) –5:
The higher the setting the lower the screen moves.
FUNCTIONS window
By using the FUNCTIONS window you can access the main
functions quickly and easily.
[1]
While stopped
Press [FUNCTIONS].
≥Functions displayed depend
on the type of disc.
[2]
Select an item with
[
3
,
4
] and press
[ENTER].
≥If you select "Other
Functions", press [3, 4] to select an item and press [ENTER].
∫ To exit the FUNCTIONS window
Press [FUNCTIONS].
Status messages
Status messages appear on the TV when operating the unit, to show
you what operation was performed and what condition the unit is in.
Press [STATUS] to change the information
displayed.
The display changes each time you press the button.
For example,
DVD-RAM
Rec.
Play
Stereo
VHS Rec.
(5)
5/22
10:15 PM
Remain
π
π
T1
00:05.14 XP
π
T2
(7)
No display
∫ Display examples
(1) Current medium
(2) Current recording or play status, input channel
≥Shows the current state of the unit and the input channel.
(3) Audio type (l 25, 31)
(4) Other drive mode
(5) The current date and time
(6) Available recording time and recording mode
(e.g.: "1:34 SP" indicates 1 hour and 34 minutes in SP mode)
≥Disc remaining time may slightly differ between different
models.
(7) Elapsed play time
(8) Recording time
≥Shows recording time, recording mode and a rough guide to
how much space has been used for recording on the disc.
FUNCTIONS
No Disc
No Disc
Program
Copy
Other Functions
ENTER
RETURN
(1)
(2)
(3)
(4)
(6)
DVD-RAM
1:34
SP
Rec.
00:00.10 SP
Play
Stereo
(8)
VHS Rec.
37
RQTV0134
Hide quick links:
Advertisement
Table of Contents
