Panasonic AG-VP320 Operating Instructions Manual page 59

DVD/ Video CD/ CD
Play fails to start even when PLAY is
pressed...
Picture is distorted during rapid
advance or rapid reverse...
No Forward/Reverse Scene Search
play...
Audio soundtrack and/or subtitle
language is not the one selected at
the initial settings...
No subtitles...
Alternative audio soundtrack
(or subtitle) language cannot be
selected...
Angle cannot be changed...
Miscellaneous
Programs cannot be viewed on TV...
Video cassette cannot be inserted...
Video cassette ejects when a
recording is started or the power is
turned off for timer recording...
In Stop mode, the motor (CYLINDER)
continues to rotate...
The disc cannot be removed..
Solution
• This DECK cannot play discs other than DVDs, Video CDs
and CDs.
• The disc may be dirty and require cleaning.
• The picture will be somewhat distorted at times:
this is normal.
• Some discs may have sections which prohibit
Forward/Reverse Scene Search. (p. 23)
• If the audio soundtrack and/or subtitle language selected at
DVD initial settings does not exist
on the disc, it will not be accessible.
• Subtitles appear only when available on disc.
• "OFF" is selected at the changing subtitle language. Select
"ON" at the "Subtitle Languages" section (p. 36) to display
the subtitles.
• Alternative language cannot be selected with discs which do
not contain more than one language.
• For some discs, alternative language cannot be selected with
the AUDIO or SUB TITLE button. Try selecting it from the
DVD MAIN MENU if available.
• This function is dependent on software availability. Even if
disc has multiple angles, they may be recorded for specific
scenes only. (p. 37)
Solution
• Make sure TV is tuned to VCR's output channel (3 or 4).
• Check connections between DECK, external antenna, and
TV.
• Set VCR/TV selector to "TV." (p. 21)
• Make sure proper signal source is selected.
• If the television is not progressive compatible, a progressive
scan picture is not available.
Connect the Video Output or S-Video Output connector
(pp. 12, 13) and set PROGRESSIVE OUT to "OFF" in the
DVD Main Menu. (p. 55)
• Insert the cassette with window side up; record tab facing
you.
• Make sure cassette record tab is intact. (p. 6)
• To enable Quick play mechanism, the cylinder will rotate for
about 3 minutes. This reduces response time from Stop to
Play mode.
• First, unplug DECK. Then, prepare a rigid wire (e.g. an
extended paper clip) and, applying moderate force, insert it
straight into the hole at the base of the tray. The tray will
eject a little. Now, pull the tray all the way out and remove the
disc. (p. 9)
59