Resume Function - Panasonic AG-VP320 Operating Instructions Manual

*Important: If a remote control button does not work when pressed,
■ ■ ■ ■ ■ Forward/Reverse Scene Search
Press FF/SLOW+ or REW/SLOW- during play.
Press PLAY to release.
• Starting forward/reverse search during play
started from menu on Video CDs may recall
menu.
• Search speed, slow at first, increases with each
additional press of the button up to 5 levels.
■ ■ ■ ■ ■ Forward/Reverse Chapter/Track Skip
Press SKIP+ | or SKIP- |
Each press skips a chapter (DVD), track
(Video CD/CD) or Program/Play List/Marker
(DVD-RAM).
[DVD / Video CD / CD]
• Pressing SKIP- |
once midway through a
chapter/track returns to the start of that
chapter/track. Each additional press skips
back one chapter/track.
• Pressing SKIP | or |
from menu on Video CDs may recall menu.
Current playback position
Chapter/Track Chapter/Track
Reverse Skip
[DVD-RAM]
• Pressing SKIP- | once midway through a
program/play list returns to the start of that
program/play list. Each additional press skips
back one program/play list.
Current playback position Marker
Program/Play List Program/Play List Program/Play List
Reverse Skip
■ ■ ■ ■ ■ Still Picture or Pause
Press PAUSE/STILL during play.
Press PLAY to release.
• DVD/Video CD : DECK will enter still picture mode.
• CD : DECK will enter pause mode.
■ ■ ■ ■ ■ Frame by Frame Picture (DVD/Video CD)
Press PAUSE/STILL in still mode.
Press PLAY to release.
• Each press advances picture one frame.
• Hold button down for consecutive frame
advance.
• Whether pictures are advanced by "FRAME" or
"FIELD" is selected automatically. (See p. 54.)
■ ■ ■ ■ ■ Slow Motion Picture (DVD/Video CD)
Press FF/SLOW+ or REW/SLOW- in still mode.
Press PLAY to release.
• Slow motion speed, slow at first, is increased
with each additional press of the button up to
5 levels.
• Reverse slow motion is not available for Video
CDs.
Auto-Power Off Function
Power turns off after DECK has been in Stop
mode (DVD) for about 5 minutes.
• When appears on the screen while a button is
being operated, it means that the corresponding
operation is prohibited by DECK or the disc.
press the DVD button on the remote and try the button again.
V.S.S. (Virtual Surround Sound)
Enjoy a surround-like effect if you are using two
front speakers only. The effect is broadened and
sound seems to come from virtual speakers on
either side if the disc has surround signals
recorded on it.
Press VSS in DVD mode.
• The Surround sound effect can be changed by
pressing VSS repeatedly as shown by the figure
during play.
below.
Notes
• Surround sound effect is available in DVD mode only.
• Turn off the surround effects on the other equipment.
• V.S.S. will not work, or will have less effect, with
during play started
some discs.
• Turn V.S.S. off if it causes distortion.
• Sound will only come from the two front speakers if
V.S.S. is on.
Chapter/Track

Resume Function

Forward Skip
DECK memorizes the point where STOP is
pressed (STOP
Press PLAY to resume play from this point.
Pressing STOP again or opening the tray
cancels RESUME, however, RESUME is not
canceled when power is turned off and on.
• RESUME works only with discs for which elapsed
play time is displayed during play.
• When a DVD-RAM still picture is played back, the
Forward Skip
counter will not be displayed, however RESUME
will function.
Enjoy Video CDs featuring
playback control without using
menus (Video CDs only)
1. Do steps 1-4 (previous page).
When menu appears, press STOP .
2. Press NUMBER keys to select desired track
(play begins).
• Check disc for track numbers.
• Press "1" to start at beginning of disc.
To Resume Menu use,
Press STOP and press PLAY , then the menu
will be displayed.
Now, go to step 4 (previous page).
Notes
• Please read the disc jacket for operation
information.
• If a single sided disc is placed in upside down,
"THIS TYPE OF DISC CANNOT BE PLAYED.
PLEASE INSERT A DIFFERENT DISC" is
displayed.
• Remove disc and press DECK POWER off when
not in use.
• Disc continues to rotate with menu displayed
even after play is done. Press STOP to clear
menu display when finished with menu.
SURROUND1 SURROUND2
SURROUND
SURROUND3
OFF
is flashing on screen).
23