Panasonic AG-VP320 Operating Instructions Manual page 55

*Important: If a remote control button does not work when pressed,
PROGRESSIVE OUT
Sets the Component Video Output Connector (p. 10, 13)
to output the Progressive scan signal.
1
Press ACTION
to display DVD MAIN MENU.
2
OFF: Progressive scan signal is not output.
ON: Progressive scan signal is output from the
Component Video Output Connector.
3
Press ACTION
to exit this mode.
A/V OPTIMIZER
You can set to preset audio/video effects as desired.
1
2
The video/audio effect of each mode is listed below.
Mode
NORMAL Standard video
CINEMA Bright areas are subdued.
DRAMA Standard video
Brightness and sharpness are
ACTION
enhanced.
Note
• With some discs, the audio/video effect may not be obtained, and the audio/video effects may not
work well.
press the DVD button on the remote and try the button again.
Press to select
"PROGRESSIVE OUT,"
and
press SET repeatedly for
mode. (See below.)
Press A/V OPTIMIZER
in Play mode to display
the A/V OPTIMIZER
selection on-screen.
• Display disappears after
5 seconds.
Press A/V OPTIMIZER
to select the desired mode
below.
NORMAL CINEMA
ACTION DRAMA
Video
Standard audio
Enhances high/low range for
dynamic sound.
Reduces high/low range so dialog
and vocals can be heard clearly.
Enhances high/low range for
dynamic sound.
Notes
• If the television is not progressive
compatible, a progressive scan picture is
not available. Connect the Video Output
or S-Video Output connector (see p. 12,
13) and set PROGRESSIVE OUT to
"OFF".
• CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE.
IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS
RECOMMENDED TO SET
PROGRESSIVE OUT TO "OFF".
IF THERE ARE QUESTIONS
REGARDING YOUR TV SET
COMPATIBILITY WITH THIS MODEL
525p DVD/VCR DECK, PLEASE
CONTACT OUR CUSTOMER SERVICE
CENTER.
ACTION
SELECT
SET
A/V
OPTIMIZER
Audio
55