Confirm The Status Using The Leds - Panasonic Toughbook CF-Y4HWPZZBM Operating Instructions Manual

Confirm the Status Using the LEDs

Indicators Indicator Name/Status
Power indicator (The brightness of the
power indicator changes in keeping with
the brightness level of the internal LCD.)
Light off: Power off / Hibernation mode
Light on: Power on
Blinking: Standby mode
ECO Economy Mode (ECO) indicator
Not lit: Economy Mode (ECO) disabled
Green: Economy Mode (ECO) enabled
Blinking green: Economy Mode (ECO)
enabled (Discharging until the remaining
battery power is 80 % or less)
Battery indicator
Not lit: Battery pack is not connected or
no charging.
Orange light on/flashing
progress. (If [Battery Charging Indicator]
in the [Main] menu of the Setup Utility is
set to [Flashing], the indicator will alter-
nately become lighter and darker
(Flashing)).
*1
Green : Fully charged.
Red: The battery level is very low (the
charge is approx. 9% or less).
Blinking red
circuit may not be working properly.
Blinking orange
be recharged temporarily when the
internal temperature of the battery pack
is outside the acceptable temperature
range for recharging or when software
applications and peripheral devices
(USB devices, etc.) are consuming too
much power.
*1
When the AC adaptor is connected
*2
The orange display light has three modes:
on, flashing and blinking. Note the difference
between flashing and blinking.
Caps Lock indicator
This indicator lights green when the
Caps Lock key is pressed: Subse-
quent non-shifted input is capitalized.
*1*2
: Charging in
*1
: Battery pack or charging
*1*2
: The battery cannot
Indicators Indicator Name/Status
NumLk indicator (Ten-key mode)
This indicator lights green when the
NumLk key is pressed.
Part of the keyboard (see figure below)
will function as a ten-key numeric input.
When the green light is on, part of the
keyboard can be used to input numbers
or calculation functions.
The [Enter] key functions differently
depending on the application. To dis-
able, press the NumLk key once more
(the indicator will turn off).
When the NumLk indicator is on: the fol-
lowing functions will operate:
ScrLk indicator (Scroll lock)
This indicator lights green when the
ScrLk key are pressed: Scroll lock
functions differently depending on the
application.
Hard disk drive indicator
Lighted: This indicator lights when the
hard disk drive is accessed.
DVD-ROM & CD-R/RW drive indicator
Not lit: Drive power is off.
Green: Drive power is on, but the DVD-
ROM & CD-R/RW drive is not accessed.
Blinking green: Drive power is on, and
the DVD-ROM & CDR/RW drive is
being accessed.
How to switch the drive power on/off:
"DVD-ROM & CD-R/RW Drive" in
onscreen Reference Manual
SD memory card indicator
Lighted: This indicator lights when the
SD memory card is accessed.
15