Reading Barcodes - Panasonic Toughbook CF-U1AQB1G2M Supplementary Instructions Manual

Reading Barcodes

1
Aim the reader at the barcode.
2
Press one of the trigger buttons on the rear side
of the computer.
The LED lights red to indicate the reading position.
To Correctly Read a Barcode with This Computer, Observe the Following.
The reading angle is important factor. Perform reading at the angle indicated in the figure.
We recommend you to set at approximately 2° to 3° angle from the perpendicular position.
Hold the reader farther away when reading a larger barcode, and closer in when reading a
smaller barcode or a thinner barcode.
Perform reading so that the entire symbol falls within the center of the red LED light.
4
Recommend
2° to 3°
Right
LED light
Press trigger button.
( Page 2)
Right