Panasonic Toughbook CF-U1A1E1Z2M Operating Instructions Manual page 42

Troubleshooting (Basic)
Display
<Only for model
with GPS>
The cursor cannot
be controlled prop-
erly.
The cursor can not
be displayed at the
right position.
Touchscreen
The cursor does not
work.
Cannot input using
the touchscreen.
42
Operate the following steps.
A Set [GPS] to [Disabled] in the [Advanced - Serial Port
Confi guration] of the Setup Utility.
B Press + (F10) and select [Yes] at the confi rma-
tion message, and press
The computer will restart.
C Log on to Windows as an administrator.
D Click (Start) and input "c:\util\drivers\gps\GPSVista.
reg" in [Start Search], and press
E Click [Yes] and click [OK].
The computer will restart.
F Press + (F2) while [Panasonic] boot screen is
displayed.
G Set [GPS] to [Enabled] in the [Advanced - Serial Port
Confi guration].
H Press + (F10) and select [Yes] at the confi rma-
tion message, and press
When using application software displaying a unique
cursor (i.e. Paint), note the following restrictions.
The cursor unique for the application software is not
enlarged.
The cursor unique for the application software may
not be displayed at the right position. Confi rm the op-
eration position using the Windows cursor (enlarged
cursor when zoomed).
When using the external mouse, connect it correctly.
Restart the computer using the keyboard.
Pr
ess (Windows) and press
to select [Restart] and press
Press
(Windows)
If the computer does not respond to keyboard commands,
read "No response." (
Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main]
menu of the Setup Utility.
(Enter).
(Enter).
three times, and press
(Enter).
, and to select [Restart].
page 43).
(Enter) .