Panasonic Toughbook CF-T8EWATZJM Reference Manual page 67

Modem
6
Click [Device Manager] in [start] - [Control Panel] - [Performance and Maintenance] - [Sys-
tem] - [Hardware].
7
Double-click [Modems], and then double-click the internal modem.
8
Click [Power Management], add the check mark for [Allow this device to bring the com-
puter out of standby], then click [OK].
To set the time to return the computer to sleep/standby
The computer will enter
Windows 7
pleted. You can avoid such uncompleted communication if you select [Never], but the computer does not return to
sleep/
Windows 7
Windows XP
Windows 7
Click or
A
Click [More power options] - [Change when the computer sleeps].
B
Set the expected communication time for the sleep setting.
C
Windows XP
Click [start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes].
A
Set the expected communication time.
B
NOTE
This function does not work when the computer is off or is in hibernation.
Connect the AC adaptor.
The screen remains dark after the computer resumes from
screen display will be restored when you touch the keyboard, Touch Pad or touchscreen.
The computer cannot resume if the telephone is not connected to the internal modem (e.g., you cannot use a PC Card
modem).
The computer needs some time to respond, so set the calling time longer than normal. If this is not possible on the
transmission side, reduce the number of rings before answering on the software that you are using to keep the com-
puter in idle waiting for the call.
sleep/ standby after the set time even when the communication is not com-
Windows XP
standby after resuming by a phone call.
on the notification area.
sleep/
Windows 7
Windows XP
67
standby. The previous