Mini Port Replicator - Panasonic Toughbook CF-T8EWATZJM Reference Manual

Mini Port Replicator

You can use an optional mini port replicator (CF-VEBU05BU). This device frees you from
being bothered by a lot of cable connections when you carry the computer. It also allows you
to connect various peripherals.
Connect the mini port replicator to the mini port replicator connector (A).
For further information, refer to the instruction manual of the mini port replicator.
NOTE
To use the mini port replicator, set [USB Port] setting to [Enabled] (default) in the [Advanced] menu of the Setup Utility.
If devices connected to USB ports (2a, 2b, 2c) does not operate:
In the case of devices with consumption voltage exceeding 100 mA, or devices for which the consumption voltage
cannot be confirmed, connect via USB port 1 or the computer's USB port.
For further information, refer to "When using a commercially available USB2.0 Hub". (
Windows XP
When the mini port replicator is connected, LAN cable and External display port should be connected to the mini port
replicator.The LAN port and External display port cannot be used.
When the mini port replicator is connected, an external display should be connected to the mini port replicator.
The external display port cannot be used.
57
page 63)