Menu Navigation - DekoLight Multi Dimmer 4 Manual

Product-Notes
Manual
Article No.: 843279

9. Menu Navigation

1. Activate / unlock operating menu
To prevent accidental changes, the operating menu locks after 60 seconds. After another 60
sec. the display switches off. To wake up the display, press any key.
After that, the message „Lock" appears. To unlock the operating menu, press the „Enter" + keys
„Down" simultaneously for 3 seconds, then you get to the main menu or the last menu used.
2. Control of the operating menu
The navigation in the operating menu and the settings is carried out exclusively using the 4 buttons below
of the display: ENTER= select, ESC= back, UP= up, DOWN= down
Selected menu items are marked with a wedge (>), selected ones with an arrow ( ).
3. Operating modes / control modes
There are 3 control options available. The multi-LED dimmer can be controlled via DMX signal, using
a manual color setting or with automatic programs.
IMPORTANT: In order for the desired mode to remain activated, once the setting has been made, DO NOT go
into the be returned to the main menu.
Main menu

4. System settings
(DMX) master: With this setting, several dimmers can be easily controlled in all operating modes in the
be connected in master-slave mode. Here, dimmer 1 acts as „master" and all others as
„Slave", i.e. they receive control signals from dimmer 1. Setting: dimmer 1 „ON", all others „NO".
System reset: With this function, all settings can be reset to the basic setting / factory setting
be reset. ATTENTION: settings that have already been changed will be lost.

Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted.

DMX

Color
(color setting)
Mode
(automatic programs)
16.02.2023
17 / 20