Safety Instructions - DekoLight Multi Dimmer 4 Manual

Product-Notes
Manual
Article No.: 843279
Dear customer,
thank you for deciding to purchase our product. The product fulfils the requirements of effective European and
national guidelines.
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
product notes and the operation manual! They contain important information for the start-up and handling. It is
important, therefore, that these documents are archived carefully for referring to information at a later stage.
aufbewahren.

1. Safety Instructions

We are not responsible for any property damage or personal injury caused by failure to observe these
productnotes and manual, improper handling or unauthorised modifications.
It can only be installed by a qualified electrician.
Make sure that the item has not been damaged during transport before putting the light into operation. It
maynot be operated if there are any damages to electrical parts.
It may only be operated once removed from the packaging.
The type plate must not be removed.
The connection lines in the building must be disconnected before installation and secured against
beingswitched back on. For this, trip the corresponding fuse switch in the building installation.
Make sure the electrical specifications for the connection lines correspond with the specifications given on
thenameplate of this product.
During commissioning, ensure the correct polarity (V+,V-) and the use of suitable DC power supplies (CV=
constant voltage, not additionally dimmable via triac or similar) and the following protective measures: SELV,
overload protection and short-circuit protection.
Please make sure that the cable and plug are free from tensile and torsional forces and are not kinked.
Protect all cables and insulation from possible damage. For flexible wires, use ferrules.
Output lines should be separated and routed away from other lines. The
Mains connection lines and lines of the dimmer must not cross each other.
Do not allow the product to come into contact with extreme heat or naked flames.
Use the supplied fastening material only when it is suited for the installation background.
The product must not be covered with objects (decorations) or thermally insulating coverings /similar materials.
Before disposal of the packaging material make sure that all components are removed.
Keep packaging material away from the reach of children and pets. The packaging contains small parts
thatmay be swallowed by children.
Deko-Light Elektronik-Vertriebs GmbH 16.02.2023
www.deko-light.com / deko@deko-light.com
Technical Data can be changed without advance notice. Errors excepted. 13 / 20