Disabling/Enabling Wireless Communication - Panasonic Toughbook CF-H1CSLFZ6M Reference Manual

Disabling/Enabling Wireless Communication

There are 3 ways of disabling and enabling wireless communication.
Wireless Switch Utility (
Settings in the [Advanced] menu of the Setup Utility (
Setting in the Wireless Communication Disable Utility (
NOTE
For further information about Wireless LAN:
For further information about Bluetooth:
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
To use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled]
(default) in the [Advanced] - [Wireless Configuration] menu of the Setup Utility (
It may take some time to turn off wireless communication after switching the wireless switch off.
If the IEEE802.11a setting is changed in [Device Manager] (
You can check the wireless LAN communication status in Intel
lowing procedure.
• Double-click ,
• Click [start] - [All Programs] - [Intel PROSet Wireless] - [WiFi Connection Utility]
Wireless Switch Utility
This utility allows you to enable or disable wireless devices from a pop-up menu in the notification area. In the default setting,
all wireless devices are enabled.
The Wireless Switch Utility icon
The icon appears in the notification area when the computer is turned ON. It shows the status of wireless devices.
• : Indicates that the wireless devices are enabled.
• : Indicates that the wireless devices are off.
• : Indicates that the wireless devices have been disabled in the Setup Utility.
To enable or disable particular wireless devices
1
Click the Wireless Switch Utility icon to show the pop-up menu.
2
Select ON or OFF for the device you want to enable or disable.
below )
page 72
page 75
, , or on the notification area.
page 82)
page 70)
page 74), the display will be changed accordingly.
®
PROSet/Wireless Software. Perform either of the fol-
69
page 82).