Panasonic Toughbook CF-H1CSLFZ6M Reference Manual page 23

Standby and Hibernation Functions
In standby or hibernation
Do not attach or remove a peripheral device (including the Cradle). Doing so may cause malfunction.
Power is consumed in standby. When power is exhausted, the data retained in memory will be lost. Connect the AC
adaptor when using the standby function.
To resume from standby or hibernation
1
Press the power switch (A).
CAUTION
Do not perform the following operations until resuming is complete. After the display is resumed, wait approximately
30 seconds (normally) or 60 seconds (when the computer is on a network).
• Touch the screen, hardware buttons or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Shut down or restart Windows.
• Enter standby or hibernation (Wait approximately 1 minute).
• Set to or remove from the Cradle.
NOTE
After resuming from standby or hibernation, the message "TosBtMng has stopped working" may appear.
Click [Close program].
If Bluetooth connections are cut off, click [start] - [All Programs] - [Bluetooth] - [Bluetooth Settings], and connect to the
Bluetooth devices again.
23
A