More Advanced Security - Panasonic Toughbook CF-F8EWDZZAM Supplementary Manual

More Advanced Security

You can increase your computer's security level by setting the BIOS level de-
scribed in this section.
Performed by the Computer Administrator.
1
Register the Supervisor Password.
You have to register the Supervisor Password to proceed to the next step.
If you have already registered the Supervisor Password, you can move on
to step 2 after performing A to C.
If you have not done this, have enrolled your fi ngerprint using Protector
Suite QL, and have already made Power-on Security effective, after step B,
your fi ngerprint authentication will be necessary.
A Turn on or restart the computer.
B Press
the computer starts the startup procedure.
C Select the [Security] menu.
D Select [Set Supervisor Password], and press
E Enter your password in the [Enter New Password], and press
· The password will not be displayed on the screen.
· You can use up to 32 alphanumeric characters (including spaces).
· The case (upper/lower) is ignored.
· To input numbers for the password, use the numbered keys on the keyboard.
· You cannot use
F Enter your password again in [Confi rm New Password], and press
G In [Setup Notice], press
2
Enable the Embedded Security (TPM).
A Select [Fingerprint Security Sub-Menu], and press
B Select [TPM State:], and press
C Select [Enable] and press
· Default setting: Disable
D Press
8
F2
several times while [Panasonic] boot screen is displayed soon after
Shift
Enter
F10
, select [Yes], and press
Ctrl
and to input a password.
.
Enter
.
Enter
.
Enter
Enter
.
Enter
Enter
.
to exit the Setup Utility.
.
Enter
.