More Advanced Security - Panasonic Toughbook CF-19KHRAG2M Supplementary Instructions Manual

More Advanced Security

You can increase your computer's security level by setting the BIOS level described
in this section.
Performed by the Computer Administrator.
1
Register the Supervisor Password.
You have to register the Supervisor Password to proceed to the next step.
If you have already registered the Supervisor Password, you can skip this
step, and move on to step 2.
If you have not done this, have enrolled your fingerprint using Protector Suite
QL, and have already made Power-on Security effective, after step B, your
fingerprint authentication will be necessary.
A Turn on or restart the computer.
B Press
F2
the computer starts the startup procedure.
C Select the [Security] menu.
D Select [Set Supervisor Password], and press
E Enter your password in the [Enter New Password], and press
· The password will not be displayed on the screen.
· You can use up to 32 alphanumeric characters (including spaces).
· The case (upper/lower) is ignored.
· To input numbers for the password, use the numbered keys on the keyboard.
· You cannot use
F Enter your password again in [Confirm New Password], and press
G In [Setup Notice], press
2
Set the High Security Level.
A Select [Fingerprint Security Sub-Menu], and press
B Select [Security mode:], and select [High].
· Default setting: Simple
C Press
ESC
D Press
F10
NOTE
In the "High" security mode, you have to enter the Supervisor or User
Password even after fingerprint authentication.
In the "Simple" security mode, you do not have to enter the Supervisor or
User password after fingerprint authentication.
several times while [Panasonic] boot screen is displayed soon after
Shift
Enter
to close the sub-menu.
, select [Yes], and press
and to input a password.
Ctrl
.
to exit the Setup Utility.
Enter
.
Enter
Enter
.
Enter
.
.
Enter
9