Problems With Cursor - Panasonic Toughbook CF-F8EWAZZJM Reference Manual

Troubleshooting (Advanced)
The battery indicator is flashing
The battery is recharging.
If [Battery Charging Indicator] in [Main] menu of the Setup Utility is set to [Flashing], the indicator will alternately become
lighter and darker.
To increase the lifetime of the battery
You can prevent deterioration of the battery pack and extend the lifetime of the battery by setting the battery's Economy
Mode (ECO) to "Enabled" in Panasonic Power Plan Extension Utility. (
However, when the battery's Economy Mode (ECO) is set to "Enabled", the battery pack stops charging at 80% of fully
charged, so the battery operation time is shorter.
To enable/disable the battery's Economy Mode (ECO), refer to "Switching the Economy Mode (ECO)". (

Problems with Cursor

The cursor cannot be controlled properly
Sensitivity when touching the Touch Pad can be adjusted. (
Make sure [Touch Pad] is set to [Enabled] on the [Main] menu of the Setup Utility. (
With the following procedure, check that no external mouse driver is installed. If it is installed, it may not possible to use
the Touch Pad.
Click (Start) - [Computer] - [System properties] - [Device Manager].
A
A standard user needs to enter an administrator password.
Double-click [Mice and other pointing devices].
B
If a name other than [Synaptics PS/2...] is displayed, then an external mouse driver is installed. Delete it, then
restart the computer.
Restart the computer by using the keyboard.
Press and press
If the computer does not respond to keyboard commands, read "No response". (
The cursor moves randomly
Adjust the touch sensitivity.
To adjust the sensitivity, refer to "Adjusting the Sensitivity when Touching the Touch Pad" (
Check that no external mouse driver is installed. Refer to steps
erly". (above)
three times, and press
page
page 13)
to select [Restart] and press Enter.
and under "The cursor cannot be controlled prop-
A B
117
30)
page 103)
page 116)
page 13).
page 31)