Panasonic Toughbook CF-F8EWAZZJM Reference Manual page 11

Using the Touch Pad
Scroll area
A. Width of the scroll
area
B. Vertical and
horizontal scroll
scroll area
3
Click [OK].
Using the Virtual Scrolling Function
Set the Virtual Scrolling function using the following procedure. The Touch Pad utility will be disabled.
1
Click on the notification area, and click [Settings].
When is not displayed:
2
Remove the check mark from [Activate Touch Pad function] in [General settings], and
then click [OK].
3
Click (Start) - [Control Panel] - [Mouse] - [Device Settings].
4
Click the device name (e.g., Synaptics TouchPad) in [Devices], then click [Settings].
5
Click [Virtual Scrolling], add a check mark for the scroll functions you want to use, then
click [OK].
6
Click [OK] at [Mouse Properties].
By dragging the inner circumference of the starting area,
you can change the width of the scroll area (A) in five
stages.
You can also change the width by sliding the [Scroll acti-
vation area] slide bar.
You can change the scroll area (B) by dragging border
of the vertical and horizontal scroll scroll area. The max-
imum starting area for the horizontal scroll is half the cir-
cumference.
1
page 7, step -A
11