Touchscreen
<Only for model with touchscreen>
You can use the touchscreen function to perform the same operation as the touch pad and mouse. Touch the screen surface
with the stylus (included).
To right-click
Click
on the notification area.
A
changes to
Click the object you want to right-click.
B
returns to
NOTE
You need to make the following setting for each user.
Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Panel Configuration].
A
Select the settings, and then click [OK].
B
Do not add a check mark to [Delete Cursor] since the display may be distorted.
The touchscreen function does not work in the Setup Utility, in the full screen of [Command Prompt] or in Recover Pro
(
page
75).
Touchscreen Calibration
1
Run [Touch Screen Calibration Utility].
Click [start] - [All programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility].
2
Using the stylus, touch each of the 12 "+" target marks one by one until it blinks, and then
click [Calibration].
3
Click [Save & Exit].
NOTE
Perform the touchscreen calibration for each user.
.
.
5