Multimedia Pocket
You can attach the following device. (refer to recent catalogs and other sources for information about the products available)
DVD MULTI drive
CAUTION
Do not insert/remove the multimedia pocket device in standby or hibernation, or when the multimedia pocket device
indicator
or the hard disk drive indicator
Do not leave a disc formatted with B's CLiP in the multimedia pocket device because the computer cannot enter
standby/hibernation even if you selected [Stand by] or [Hibernate] in [When I close the lid of my portable computer]
(
page 8
"Setting Standby or Hibernation").
NOTE
Read the instruction manuals of the devices carefully.
Replacing the Multimedia Pocket Device
1
Disable the multimedia pocket device function.
Click
on the notification area.
A
Click [Safety remove Standard Dual Channel PCI IDE Controller].
B
Follow the on-screen instructions.
C
Confirm that the multimedia pocket device indicator
D
This step is not necessary when:
• Removing the device after turning off the computer.
•
is not displayed.
• The device does not appear in the list in step B.
2
Press and hold the release button (A), and slide the device out
of the multimedia pocket.
is on.
and the hard disk drive indicator
21
indicators are not lit.