Security Menu - Panasonic Toughbook CF-74JCL02AM Reference Manual

Setup Utility

Security Menu

Boot Prompt Configuration
Setup Utility Prompt
• When [Setup Utility Prompt] is set to [Disabled], the message "Press F2 for Setup / F12 for LAN"
is not displayed on [Panasonic] boot screen. However, F2 and F12 will work even if the message
is not displayed.
Password on boot
Set Supervisor Password
Hard Disk Lock
• Can be changed only when [Set Supervisor Password] is set.
User Password Protection
Set User Password
Embedded Security(TPM)
• Only for model that supports TPM
• For information on TPM, refer to the Installation Manual of "Trusted Platform Module (TPM)".
Click [start] - [Run] and input "c:\util\drivers\tpm\readme.pdf", and click [OK].
Fingerprint Security
• Only for model with Fingerprint Reader
AMT Configuration
• Only for model that supports Intel(R) AMT
80
Underlined items are the factory presets.
Disabled
Enabled
Disabled
Enabled
Enter the sub-menu.
Disabled
Enabled
Protected
No Protection
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.