Starting Up
Other startup problems.
Entering Password
Even after entering the
password, password input
screen is displayed again.
Cannot log on to Windows.
("The user name or pass-
word is incorrect" is dis-
played.)
Shutting down
Windows does not shut
down.
Display
No display.
Press F9 in the Setup Utility (
Setup Utility settings (excluding the passwords) to the default values. Start the
Setup Utility and make the settings again.
Remove all peripheral devices.
Check to see if there was a disk error.
A Remove all peripheral devices including an external display.
B Click
(Start) - [Computer] and right-click [Local Disk (C:)], and click [Properties].
C Click [Tools] - [Check Now...].
• A standard user needs to enter an administrator password.
D Select the option in [Check disk options] and click [Start].
E Click [Schedule disk check] and restart the computer.
A Click [start] - [My Computer] and right-click [Local Disk(C:)], and click [Properties].
B Click [Tools] - [Check Now].
C Select the option in [Check disk options] and click [Start].
Start the computer in Safe Mode and check the error details. When the [Panasonic]
boot screen disappears
Options Menu is displayed. Select the Safe Mode and press Enter.
*1
When [Password on boot] is set to [Enabled] in the [Security] menu of the Setup
Utility, [Enter Password] appears after the [Panasonic] boot screen disappears. As
soon as you enter the password and press Enter, press and hold F8.
The computer may be in ten-key mode.
If the NumLk indicator
The computer may be in Caps Lock mode.
If the Caps Lock indicator
mode, and then input.
The user name (account name) includes an "@" mark.
If another user account exists:
Log on to Windows using another user account, and delete the account that
includes "@". Then create a new account.
If no other account exists:
You need to reinstall Windows (
Remove the USB device and the ExpressCard.
Wait one or two minutes. It is not a malfunction.
The external display is selected. Press Fn + F3 or
Wait until the display has been switched completely before pressing Fn + F3 or
*2
+ P
again.
When using an external display,
• Check the cable connection.
• Turn on the display.
• Check the settings of external display.
The display is turned off by the power-saving function. To resume, do not press the
direct selection keys, but press any other key like Ctrl.
The computer entered sleep (
by the power-saving function. To resume, press the power switch.
*2
Windows 7 only
Reference Manual "Setup Utility") to return the
*1
at startup, press and hold F8 until the Windows Advanced
NumLk to disable the ten-key mode, and then input.
lights, press
Caps Lock to disable the Caps Lock
lights, press
page 19).
) /standby (
*2
+ P
to switch the display.
) or hibernation
23