Related Manuals for Faber FLANGE 3
Summary of Contents for Faber FLANGE 3
- Page 1 FLANGE 3 Installation Instructions Use and Care Information Instructions d'installation Utilisez et d'entretien Instrucciones de instalación Información de uso y cuidado FLANGE 3...
- Page 2 LINER DIMENSIONS Front View Side View Bellucci, Daniele Bellucci, Danie 23-Oct-2020 23-Oct-2020 Released Released Overall Dimensions...
- Page 3 PARTS PARTS INCLUDED REF PART Torx Screws (1/8" x 5/16") Torx Screws (3/16" x 5/16") PARTS NEEDED PART 3 1/4" x 10" Rectangular Ductwork TOOLS NEEDED TOOL Tape Measure Pencil Torx Screwdriver Metal sheers Work gloves Foil Tape...
- Page 4 Unscrew the 4 original screws from the motor box and detach from the hood. Attach the Flange 3 to the hood in the same location as the original motor box with the screws provided in the hardware bag as shown...
- Page 5 INSTALL THE FLANGE 3 TO THE DOWNDRAFT RANGE HOOD Remove the blocker plate from the hood. Attach the Flange 3 to the hood in the same location as the blocker plate using the screws provided in the hardware bag. FOR SCIROCCO PLUS MODELS:...
- Page 6 Venting to the side FOR SCIROCCO LUX MODELS: Venting down...
- Page 7 Venting to the side Seal with foil tape Consult your Hoods Installation Manual and the Remote Blower or In-Line Blower Manual to continue with installation.
- Page 8 991.0xxx.xxx_01 - 210128 D0000xxxx_00...
Need help?
Do you have a question about the FLANGE 3 and is the answer not in the manual?
Questions and answers