Faber MUDAMPER6 Installation And Safety Instructions

Makeup air kit
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

PRODUCT INSTALLATION AND SAFETY INSTRUCTIONS
MAKEUP AIR KIT MODELS : MUDAMPER6 (6") , MUDAMPER8 (8"), MUDAMPER10 (10")
READ ALL INSTRUCTIONS
PRIOR TO INSTALLATION
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK HAZARD,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1.
Shut off and disconnect all power supply to unit(s) prior to installation or service/repair of device.
2.
Use this unit only in manner intended by manufacturer.
3.
All applications of device must follow all applicable laws, codes, regulations, and standards.
4.
Installation of device must be completed by a certified installation expert or HVAC professional.
5.
For residential use only, any use beyond factory recommendations voids all warranties.
6.
During extreme weather events such as large amounts of snow, ensure that the intake area for the
outside return air duct is not blocked and a clear pathway to fresh air is provided.
7.
This unit is intended to be installed within the home in a location protected from any kind of moisture
8.
Do not connect this kit directly to any combustion appliances
9.
Do not operate this system until all installation guidelines have been adhered to
10. In cold weather climates additional insulation and vapor barriers are recommended to prevent
condensation build up
11. Any ductwork installation used with the fresh air return damper must comply with all local and
national applicable codes
Table of Contents:
Product Safety
Air Handler Fan Direct Connection Installation
Planning/Maintenance/Testing your System
Passive Airflow Installation
Switch Assembly Installation Options
Technical Specifications
Warranty Information / FAQ
FOR RESIDENTIAL USE ONLY
Page
1
2
3
3
4
5
6
Parts Supplied for Makeup Air Kit:
kit.
1 - Motorized Damper
1 - Switch Assembly
(installed in separate
(installed inside hood
fresh air ducting)
ducting)
*Diameter varies by model
each series /model sold as individual
1 - 24V Plug-in
Power Transformer
(used with direct
connection
installations only)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MUDAMPER6 and is the answer not in the manual?

Questions and answers

Summary of Contents for Faber MUDAMPER6

  • Page 1 PRODUCT INSTALLATION AND SAFETY INSTRUCTIONS MAKEUP AIR KIT MODELS : MUDAMPER6 (6”) , MUDAMPER8 (8”), MUDAMPER10 (10”) READ ALL INSTRUCTIONS PRIOR TO INSTALLATION FOR RESIDENTIAL USE ONLY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK HAZARD, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: Shut off and disconnect all power supply to unit(s) prior to installation or service/repair of device.
  • Page 2 Option #1 - Makeup Air Kit HVAC System Installation: THE MAKE-UP AIR KIT HAS THE ABILITY TO CONNECT DIRECTLY TO THE HVAC AIR CIRCULATION FAN MOTOR. THIS PROVIDES CLEANER AND HEALTHIER AIR BY UTILIZING THE HVAC FILTRATION SYSTEM Motorized DURING OPERATION OF OUR RESIDENTIAL MAKE-UP AIR SYSTEM. Fresh Return Air Air Damper...
  • Page 3: Testing The System

    Option #2 – Direct Connect Kitchen Installation (independent of HVAC system) *For general comfort and aesthetics, it is recommended that the Make-up Air Damper intake is located in an area that does not ventilate directly on or into kitchen preparatory or dining areas.* NOTE: Fresh Air Damper is always installed in a separate duct than the range hood ducting Sizing the fresh air intake and exhaust duct symmetrically will help avoid air turbulence and drag while the internal air supply is replenished during operation of the kitchen vent hood.
  • Page 4 Air Switch Installation Inside Hood Ducting (applies to all installations): Vertical Ducting Installation: Inline Blower Installation: Inline Motor Horizontal Duct Installation: Direct Rear Ducting Installation: Remote Blower Installation: Downdraft Installation: Exterior Mounted Fan Motor Downdraft Fan Motor...
  • Page 5 Motorized Fresh Air Damper Specifications: Air Switch Assembly and Collar Specifications: (located in fresh air ducting from outside the home) (located inside range hood ducting) Unit Specifications: Unit Specifications 16 AWG x 2, 10A, 24 VAC. Refer to full safety instructions prior to Weight: 3 lbs.
  • Page 6: Warranty Information

    WHAT DOES THE MAKE UP AIR KIT FROM FABER DO? The Faber make up air kit helps to replenish the air, which is exhausted from the home when using your kitchen range hood. The replenished air returning into the home is clean, healthy outside air that flows thru the open fresh air damper when a range hood is operating above 400 cfm of air movement.
  • Page 7 INSTALLATION DU PRODUIT ET MESURES DE SÉCURITÉ MAQUILLAGE D'AIR MODÈLES: MUDAMPER6 (6”), MUDAMPER8 (8”), MUDAMPER10 (10”) LIRE TOUTES LES INSTRUCTIONS AVANT L'INSTALLATION Pour Utilisation Domestique Uniquement AVERTISSEMENT: POUR RÉDUIRE LES RISQUES D'INCENDIE, RISQUE DE CHOC ÉLECTRIQUE, OU DE BLESSURES, SUIVEZ: Éteignez et débranchez l'alimentation électrique à...
  • Page 8 Choix #1 - Maquillage système de CVC installation du système d'air: L'AIR KIT DE MAQUILLAGE a la capacité de se connecter directement au CVC CIRCULATION D'AIR FAN MOTOR. Cela donne AIR propre et plus sain en utilisant le SYSTÈME DE FILTRATION CVC PENDANT LE Motorisé...
  • Page 9: Test Du Système

    Choix #2 – Direct Connect Installation de cuisine (indépendant du système de CVC) *Pour le confort et l'esthétique générale, il est recommandé que le maquillage apport de volet d'air est située dans une zone qui n'a pas ventiler directement sur ou en préparation de la cuisine ou de salle à manger.* NOTA: registre d'air neuf est toujours installé dans un conduit séparé...
  • Page 10 Installation de commutation air à l'intérieur Hotte Conduits (appuies à toutes les installations): Installation Conduits Verticaux: Inline Installation du Ventilateur: Moteur monté dans une ligne de ventilateur Installation Conduit Horizontal: Direct Installation Conduits Arrière: Installation Ventilateur à Distance: Installation de Downdraft: Gendarmerie extérieur du moteur du...
  • Page 11 Motorisés fraîches Spécifications de registre d'air: Mettez Spécifications de l'Assemblée et collier: (située dans l'air frais de l'extérieur de la canalisation maison) (situé à l'intérieur hotte conduits) Caractéristiques de l'unité: Unit Specifications 16 AWG x 2, 10A, 24 VAC. Reportez-vous aux consignes de sécurité Masse: 3 lbs.
  • Page 12: Informations Sur La Garantie

    Que fait l’air d’appoint kit Faber ne? Le Faber composent le kit air aide à reconstituer l'air, qui est évacué de la maison lorsque vous utilisez votre hotte de cuisine. L'air reconstitué retour à la maison est l'air extérieur propre, sain qui coule à travers le registre d'air frais ouvert quand une hotte de cuisinière fonctionne au-dessus de 400 cfm de circulation de l'air.

This manual is also suitable for:

Mudamper8Mudamper10

Table of Contents