Sharp KA-73G68BNH-PL User Manual page 51

supply for a long period of time.
Adjusting the Cooking Time
The cooking time can be adjusted during
"WAIT" mode or during "OPERATING"
mode.
Adjusting the Minute Minder
Touch the MODE(
M i n u t e M i n d e r
the Time display and "00:00" appears.
Adjust the desired time period for the
warning signal using the PLUS and MINUS
sensor buttons while the symbol is flashing.
When you have completed the adjustment,
do not press any buttons for a few seconds,
then the Minute Minder timer will be set.
When the timer reaches zero, an audible
warning will sound, and the Minute Minder
symbol and "00:00" will flash on the
Time display. Press any button to stop
the audible warning and the symbol will
disappear.
Adjusting the Cooking Duration Time
This function helps you to cook for a fixed
period of time. Prepare the food for cooking
and put it in the oven. Then, select the
desired cooking function and the
temperature. Touch the MODE(
b u t t o n u n t i l y o u s e e t h e
Time symbol on the Time display. Set the
required cooking period using the PLUS
and MINUS sensors while the timer is in
this position. When you have completed the
adjustment, wait until the current time of
day is displayed and until the Duration Time
symbol remains illuminated.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the Duration Time symbol will flash on
the Time display. Touch any sensor on the
control unit to end the sound.
Adjusting the Cooking End Time
This function is used to begin cooking
after a certain period of time and for a
specific duration of time. Prepare the food
for cooking and put it in the oven. Then,
select the desired cooking function and the
temperature.
Touch the MODE(
the Cooking Duration Time symbol on the
Time display. Set the required cooking
period using the PLUS and MINUS sensor
while the timer is in this position. When you
have completed the adjustment, wait until
the current time of day is displayed and until
the Cooking Duration Time symbol remains
illuminated.
) sensor until the
symbol illuminates on
) sensor
Duration
)o button until you see
Then, touch the MODE(
until you see the Cooking End Time symbol
on the Time display. The time of day and
the Cooking Duration Time symbol will
flash. Set the required finish time using the
PLUS and MINUS sensors while the timer
is in this position. When you have
completed the adjustment, wait until the
current time of day is displayed and until
the Cooking End Time symbol remains
illuminated.
The oven will calculate the operating time
by deducting the cooking period from
the set finishing time, at which it will stop
operating. The timer will give an audible
warning and the Cooking End Time symbol
will flash. Touching any button on the timer
will end the audible warning.
Digital Timer Sound Adjustment
To change the warning signal sound, while
the time display shows the time of
day,press and hold the THERMOSTAT ( )
sensor button for 5 seconds until there
is an audible signal sound. After that,
different signal sound will be heard each
time the PLUS and MINUS buttons next to
the thermostat button are pressed. There
are five different types of signal sounds. If
"tn0" is selected, all sounds will be turned
off except alarm and error sounds. Select
the sound you want and any other do not
press a button. After a short time the
selected beep will be recorded.
Boost Function
This function is used to shorten the
preheating time. The BOOST( ) sensor
will illuminate when the Turbo, Fan, Static
or Pizza functions are selected. To save
preheating time, touch the BOOST( )
sensor button before starting a cooking
operation.
Use this function to heat the oven the
desired temperature as quickly as possible.
This mode is not appropriate for cooking.
Key Lock Function
The key lock is used to avoid unintentional
changes to oven settings.
To activate the key lock, touch the PLUS
and MINUS sensor buttons for 2 seconds
until you see Key Lock symbol on the
display. To deactivate the key lock, touch
the PLUS and MINUS sensor buttons
for 2 seconds until the key lock symbol
disappears from the display.
When the key lock is engaged, only the ON/
OFF sensor button can be activated. All
EN - 19
) sensor button