Download Print this page

Ude MR-400/M Manual

Hand-held wireless microphone

Advertisement

Quick Links

MR-400/M
Hand-held wireless microphone
Description
Wireless handheld microphone and receiver set. Designed to offer freedom of movement without
worrying about distances or interferences.
- Automatic synchronization of receiver / transmitter frequencies.
- Microphone with built-in LCD screen.
- Noise reduction filter for spurious frequencies.
- Suitable for small and medium sized installations.
Technical characteristics
Receiver
Mode
Wave stability
Sensitibity
Max Output level
Balanced
Unbalanced
Power Supply
Connection
Transmitter
Stability
Power consumption
Power supply
Battery life
EQUIPOS Y SISTEMAS MEGAFONÍA / INTERCOM
Tel.: +34 934 772 854 / +34 609 914 787
PLL
10 PPM
-105 dB
0-400 mv
0-200 mv
12 15V DC
XLR Balanced
6,35mm Jack unbalanced
10 PPM
30 mW
AA 2x batteries
6-8 hours
ude@udeaudio.com
- Receiver MR-400
- Hand-held microphone MH-403
- Power Supply
AC/DC 100-240V 50/60Hz
System Parameters
Frequency range
Frequency response
Dynamic Range
T.H.D.
S/N Ratio
Working distance
21
front
Dimensions in millimeters
PUBLIC ADDRESS SYSTEMS
BARCELONA - SPAIN
642-665MHz
40-15KHz
≥90dB
≤0.5%
≥90dB
>100 meters
16
5
side
rev.0
610.567A
1
3

Advertisement

loading
Need help?

Need help?

Do you have a question about the MR-400/M and is the answer not in the manual?

Questions and answers

Summary of Contents for Ude MR-400/M

  • Page 1 MR-400/M Hand-held wireless microphone - Receiver MR-400 - Hand-held microphone MH-403 - Power Supply AC/DC 100-240V 50/60Hz Description Wireless handheld microphone and receiver set. Designed to offer freedom of movement without worrying about distances or interferences. - Automatic synchronization of receiver / transmitter frequencies.
  • Page 2 MR-400/M Front panel Antenna x 2 Decrease Selected frequency Volume Increase Frequency signal level Frequency /Channel adjustment Selected channel On / Off Microphone battery level Microphone / receiver sinchronization IR sensor Rear paner DC input 6.35mm jack unbalanced output. XLR balanced output. Balanceada...
  • Page 3 MR-400/M Alojamiento baterias Sensor IR On / Off Display LCD Operating mode Connect the power supply to the MR-400 receiver. Connect the audio cable to the XLR (balanced) or 6.35mm jack (unbalanced) output for connect it to an amplifier or power amplifier.