ACR Electronics OLAS CORE Manual page 2

Testing the alarm
FOR FIRMWARE VERSION 2.0+
6. Press the control switch again once. 3 beeps will sound
to indicate that the transmitter is still missing, and the
system is still in pause state.
8. Place the transmitter next to the Core.
7. Switch the ACR OLAS transmitter back ON.
9. Press the control switch once. The Core will beep, the
number of beeps represent the number of tags it is now
tracking. Tracking resumes. Solid red on the control
switch indicates it is tracking correctly.
www.acrolas.com
Press for 4
seconds until
light green
Double press