Related Manuals for ACR Electronics GlobalFix V5 Category 1 AIS EPIRB
Summary of Contents for ACR Electronics GlobalFix V5 Category 1 AIS EPIRB
- Page 1 EMERGENCY POSITION INDICATING RADIO BEACON WITH AIS AND RLS Models Covered • GlobalFix V5 Category 1 AIS EPIRB English • GlobalFix V5 Category 2 AIS EPIRB U S E R M A N U A L...
- Page 2 The technical data, information and illustrations contained in this manual were believed to be correct at the time of print. ACR Electronics Inc. reserve the right to change specifica- tions and other information contained in this manual as part of our continual improvement process.
- Page 3 GlobalFix V5 User Manual IN CASE OF EMERGENCY USE ONLY IN SITUATIONS OF GRAVE AND IMMINENT DANGER DEPLOYING YOUR BEACON Category 1 (Automatic or Manual Deployment) Category 2 (Manual Deployment Only) IN A NON-EVACUATION EMERGENCY - THE BEACON CAN ALSO BE MANUALLY DEPLOYED FROM EITHER BRACKET AND MANUALLY ACTIVATED USING THE ON/OFF ACTIVATING YOUR BEACON Manual Activation...
-
Page 4: About Your Epirb
GlobalFix V5 User Manual ABOUT YOUR EPIRB COSPAS/SARSAT System The basic Cospas-Sarsat concept is illustrated in the figure below. The System is composed of: • distress radio beacons (ELTs for aviation use, EPIRBs for maritime use, and PLBs for personal use) which transmit signals during distress situations •... -
Page 5: Return Link Service
GlobalFix V5 User Manual Return Link Service The Galileo Return Link Service (RLS) is a free-of-charge global service available to Cospas-Sarsat RLS compatible beacons. The new functionality, currently offered uniquely by Galileo, enables a communication link that relays a Return Link Message (RLM) back to the originating beacon through the Galileo Navigation Signal in Space. -
Page 6: Table Of Contents
GlobalFix V5 User Manual ABOUT YOUR EPIRB COSPAS/SARSAT System Return Link Service AIS System The GlobalFix Range GENERAL Introduction Exposure to RF Electromagnetic Energy Warnings What’s in the Box Operating Modes GLOBALFIX V5 OVERVIEW INSTALLATION Location Removal from and Re-fitting to the Automatic Release Housing Manual Mounting Bracket - Removal and Re-fitting Fit the Manual Mounting Bracket OPERATION... -
Page 7: General
GlobalFix V5 User Manual GENERAL Introduction This manual provides valuable information for the installation, operation and routine maintenance of the GlobalFix V5. Please read this manual completely before using your GlobalFix V5. Exposure to RF Electromagnetic Energy This product complies with EN62479 (EU) and RSS-102 (Canada). Warnings It is a legal requirement to register your GlobalFix V5 with your National Authority. -
Page 8: What's In The Box
GlobalFix V5 User Manual What’s in the Box Mounting Bracket (see options) GlobalFix V5 User Guide& Labels pack Mounting Screws (x3 for Cat 2) (x6 for Cat 1) Operating Modes Your GlobalFix V5 may be operated in a variety of modes. 2.5.1 Automatic activation Should the vessel be in danger of sinking the GlobalFix V5 should be removed from its bracket and placed in the sea. -
Page 9: Globalfix V5 Overview
GlobalFix V5 User Manual GLOBALFIX V5 OVERVIEW ON/OFF Key (Under flap) Indicator LED Antenna Strobe light (internal) TEST Key NFC Antenna Witness Label Lanyard under rubber band Programming Details Label (behind) Category 1 Bracket Category 2 Bracket The lanyard is provided to attach the GlobalFix V5 to the life raft or your person, once it is activated. -
Page 10: Installation
GlobalFix V5 User Manual INSTALLATION Failure to follow the following installation guidelines may cause the GlobalFix V5 to operate incorrectly. Do not mount the GlobalFix V5 closer than 1.0 metre to any steering compass as this may affect the accuracy of the compass. Keep the GlobalFix V5 away from any strong magnetic sources such as loudspeakers, compass compensation magnets, etc. - Page 11 GlobalFix V5 User Manual For extreme use situations, remove the HydroFix HRU and deploy the ejector spring for access to the fifth mounting hole. Hold the bracket in place to mark the screw holes or use the provided mounting template. The use of #10 pan head stainless steel fasteners [minimum of ½”...
-
Page 12: Manual Mounting Bracket - Removal And Re-Fitting
GlobalFix V5 User Manual Manual Mounting Bracket - Removal and Re-fitting Press the tab marked PUSH to release the GlobalFix V5 from the Manual Bracket. Place the antenna into the slot on the bracket and insert the top of the GlobalFix V5 into the bracket. Push the bottom into the bracket until a click is heard Fit the Manual Mounting Bracket Using the dimensions shown, use the three No10 x 1”... -
Page 13: Operation
GlobalFix V5 User Manual IN CASE OF EMERGENCY USE ONLY IN SITUATIONS OF GRAVE AND IMMINENT DANGER OPERATION The GlobalFix V5 is designed for best operation while floating in water. If used in other situations ensure that the GlobalFix V5 is placed in the open, clear of any cover and kept upright. - Page 14 GlobalFix V5 User Manual 5.1.2 Lift the red flap breaking the witness seal DO NOT LEAVE THE BEACON IN THE CATEGORY2 BRACKET IF THE VESSEL IS IN DANGER OF SINKING 5.1.3 Press and hold the red button for 1 to 2 seconds to activate. (Until the green LED starts to flash) The GlobalFix V5 will now be operational.
-
Page 15: Optical Indications On Activation
GlobalFix V5 User Manual Optical Indications on activation • The LED will illuminate green (blue if RLS is enabled) for 1 second. • The strobe light will start flashing. • Within 1 minute* of activation, the indicator LED will flash a quick burst of 5 indicating 406MHz transmission. -
Page 16: Deactivation
GlobalFix V5 User Manual Deactivation 5.3.1 Deactivation if Manually Activated If the GlobalFix V5 has been inadvertently activated or the emergency situation has passed, it can be turned off simply by pressing and holding for 1 to 2 seconds the ON/OFF key. -
Page 17: Nfc And Mobile App
GlobalFix V5 User Manual TESTING Routine testing of your GlobalFix V5 is recommended to ensure it is in good working order if needed in an emergency. Monthly testing is recommended, but remember that each test will reduce the battery capacity slightly and reduce the operating time of your GlobalFix V5 during an emergency. -
Page 18: Beacon Test
GlobalFix V5 User Manual Beacon Test Ensure the antenna is free and above the GlobalFix V5 before commencing the test. Fold the antenna back behind the EPIRB as you replace it in the housing. Because the test transmits a short burst on the aircraft distress frequency of 121.5MHz, please only carry out this test in the first five minutes of each hour. -
Page 19: Gnss Test
GlobalFix V5 User Manual Because this test transmits a short burst on the aircraft distress frequency of 121.5MHz, please only carry out this test in the first 5 minutes of each hour. The battery must be replaced either prior to the expiry date shown on the rear label or after the GlobalFix V5 has been activated. -
Page 20: Beacon Registration
GlobalFix V5 User Manual For further information regarding Self Test and Self Test history use the ACR Mobile App to connect to your GlobalFix V5 using Near Field Communication (NFC). Android BEACON REGISTRATION It is the owner’s responsibility to register this beacon with the appropriate National Authority before operation. -
Page 21: Unregistered Beacon
GlobalFix V5 User Manual UNREGISTERED BEACON It is important to register your beacon. Operation of a beacon that is unregistered or incorrectly registered could lead to delays in providing the rescue services required by the operator of that beacon. APPENDIX Maintenance and Troubleshooting EPIRBs require little maintenance except periodic cleaning, if required. -
Page 22: Batteries
GlobalFix V5 User Manual 8.1.3 Shore Based Maintenance (SBM) • If the EPIRB is fitted on a vessel which requires GMDSS compliant equipment, the EPIRB shall be serviced, tested and approved as required by SOLAS regulation IV/15.9.2 of SOLAS 1974 as amended with, in accordance with MSC/Circ.1039 guidelines for shore-based maintenance of Satellite EPIRBs within 5 years, or by the date of battery expiry, whichever comes first. -
Page 23: Decommissioning And Disposal
GlobalFix V5 User Manual Decommissioning and Disposal Care should be taken when disposing of your GlobalFix V5 when it is no longer required. It is recommended to remove the battery from the GlobalFix V5 by removing the top case and lifting clear the circuit board. -
Page 24: Hydrofix Hru Replacement
GlobalFix V5 User Manual HydroFix HRU Replacement When opening the lid of the Float Free Housing, note that the beacon is installed with the logo facing outward. Pull the beacon with steady pressure from the bracket. Do not get beacon wet while it is out of the bracket. The HydroFix HRU has a keying feature that locks it to the bracket. -
Page 25: Specifications
GlobalFix V5 User Manual Specifications 406MHz Transmitter Transmit Power (EIRP) Frequency 406.031 MHz ±1KHz Modulation Phase ±1.1 Radians (16K0G1D) Encoding Biphase L Rate 400 bps AIS Transmitter Transmit Power (EIRP) 1Watt±3dB Frequency 161.975/162.025MHz ±500Hz Baud rate 9600baud Synchronisation Messages Message 1 (Position), Message 14 (Status) Repetition interval 8 messages/minute Message 14 sent twice every 4 minutes... -
Page 26: Approvals
GlobalFix V5 User Manual General Dimensions of EPIRB (Inc. antenna) 18.5 x 4.3 x 4.36 in. (470 x 109 x 111 mm) Weight 1.78 lbs (810g) Dimensions of Float Free Housing 6.2 x 15.75 x 5.9 in. (157 x 400 x 150 mm) Weight (Inc. -
Page 27: Warranty Information
GlobalFix V5 User Manual WARRANTY INFORMATION Limited Warranty Your ACR product is warranted against manufacturing defects in materials and workmanship for a period of 2 years from the date of purchase and in accordance with the following conditions. ACR will at its discretion, repair or replace faulty product free of charge excluding the cost of shipping. - Page 28 REAR COVER 5757 Ravenswood Road Fort Lauderdale, Florida 33312 United States of America support@acrartex.com www.ACRARTEX.com...