Output Mode Setup
1) Push
to enter setup interface;
or
2) Push
to select the output status bar;
3) Rotate
to select Out State;
4) Output status symbol will shown on the top screen when output is finished;
5) Push
to exit the setup page.
Notice: When output function is operating, power supply should remain enable status. That is,
operating status when turn off the power supply.
Language Setup
1) Push
to enter setup interface;
or
2) Push
to select language field;
3) Rotate
to select Languge type (English/Chinese);
4) Push
to exit the setup page.
UDP6720 Series Digital Control Power Supply User's Manual
14
should keep