Advertisement
Cleaning technology
•
Short instructions for Citymaster 1650
Driving with the Citymaster 1650
Safety information
These short instructions may be used only in conjunction with the original operating manual!
All cross-references
Please observe the safety information in the operating manual, as from page 11!
Information about special risks, as from page 16! The vehicle may be put into operation only by trained
personnel!
1. Preparing for driving
Move the accelerator pedals 38/39 to the neutral
position.
Actuate the brake pedal 47 or the parking brake 81.
Warning light A lights up. Fasten the seat belt!
47
39
38
3. Starting transport mode
Release the parking brake 81. Warning light A off.
Use the accelerator pedal 38/39 to select the driving
direction.
Working with the vacuum sweeping system
1. Installing the vacuum sweeping system
Page 130
Further installation descriptions for attachments
can be found in the operating manual for the CM 1650.
2. Topping up circulating water D
Page 138
3. Topping up fresh water E
Page 139
Hako GmbH - Head Office - Hamburger Str. 209-239 - 23843 Bad Oldesloe, Germany
Tel. +49 4531 806-0 - Fax +49 4531 806-338
Municipal technology
refer to the pages in the CM 1650 operating manual.
Page 88
Page 90
2. Starting the engine
Use the ignition switch 82 to preheat the engine.
Start the engine once the telltale B goes out.
Observe the warning symbols!
A
B
C
4. Parking the vehicle
Move the accelerator pedal back to the neutral position.
Lock the parking brake 81. Warning light A on.
Page 89
Page 48
81
82
Page 95
E
D
Advertisement
