HAKO Citymaster 1650 Short Instructions

Cleaning technology
•
Short instructions for Citymaster 1650
Before start-up of the vehicle
Safety information
These short instructions may be used only in conjunction with the original operating manual!
All cross-references
Please observe the safety information in the operating manual, as from page 11!
Information about special risks, as from page 16! The vehicle may be put into operation only by trained
personnel!
1. Removing the locking shackle
Caution: Risk of crushing!
Hydraulic oil specification: HVLP 46
Storage location: Bolt A with split pin
A
3. Checking the engine oil level
Caution: Risk of scalding!
Engine oil specification: ACEA E6 (Low SAPS)
Note: Switch on the battery isolating switch (optional) B.
Hako GmbH - Head Office - Hamburger Str. 209-239 - 23843 Bad Oldesloe, Germany
Tel. +49 4531 806-0 - Fax +49 4531 806-338
Municipal technology
refer to the pages in the CM 1650 operating manual.
Page 84
Page 85
B
2. Checking the fuel supply
Caution: Risk of fire!
Fuel specification: Diesel (EN 590)
4. Checking the hydraulic oil level
Caution: Risk of crushing!
Hydraulic oil specification: HVLP 46
Page 85
Page 85