Table of Contents
Advertisement
CAUTIONS
Exercise caution when moving the printer. If you
drop the unit, do not attempt to use it. If during use
you notice that the cabinet is
damaged, shut the printer
down, unplug it and contact
your J VC dealer. Use of the
printer under these
conditions can lead to fire or
electric shock.
DO NOT place heavy objects on the printer's
power cord, or leave the cord near any heat-
generating appliance, as this can damage the cord.
Avoid excessive pulling or twisting of the power
cord. If the power cord
becomes cut or otherwise
damaged, contact your J VC
dealer. When unplugging the
printer, DO NOT pull on the
cord. Hold the plug itself and
remove it from the AC outlet.
Use of the printer with a
damaged power cord can
lead to fire, electric shock
and unit malfunctions.
DO NOT remove the cover and attempt to repair or
modify the printer. There are high-voltage
components within the unit,
and the risk of electric shock
and unit malfunctions exists.
If a problem occurs, contact
your J VC dealer.
Illustrations of this video printer maydiffer
slightly from production models.
Downloaded from:
https://www.usersmanualguide.com/
ABO U T TH ERM AL H EAD S
• The thermal heads, necessary for printing, are located
within the unit. The heads can become extremely
warm. To prevent possible burns and injuries, do not
touch the thermal heads.
• When the printer is used for extended periods, the
thermal heads experience wear and tear just like VCR
heads. As the thermal heads become worn, print
quality will gradually decrease. When you notice a
decline in quality, it is possible that the heads may
need to be replaced. Consult your J VC dealer.
M O ISTU RE CO N D EN SATIO N
If condensation occurs inside the printer, it may adhere
to print paper during printing, causing poor quality
prints and paper jams. If you think condensation may
exist within the unit, let the unit sit for at least 2 hours
(with the power on) to dry sufficiently. If paper is stuck
within the unit, remove it before turning the power on.
Unused print paper subjected to moisture should not
be used for printing.
• Condensation may occur in the following situations:
1) In a room when the heater suddenly comes on;
2) In the direct path of cool air from an air
conditioner;
3) When the unit is moved from a cool place to a
warm place.
D U ST
Due to dust or lint adhering to print paper, or to
extreme variations in temperature, a small degree of
colour smearing or lines may be visible in prints.
Failure to heed the following precautions may
result in damage to the printer.
1. D O N O T place the printer . . .
... in an environment prone to extreme temperatures
or humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields
are generated.
... on a surface that is unstable or subject to
vibration.
2. D O N O T block the printer's ventilation openings.
3. D O N O T place heavy objects on the printer.
4. D O N O T place anything which might spill on top of
the printer.
5. AVO ID violent shocks to the printer during
transport.
CAU TIO N :
Changes or modifications not approved by J VC
could void user's authority to operate the
equipment.
3
EN
Advertisement
Table of Contents
