JVC GV-DT1 Instructions Manual page 2

Digital video printer
Hide thumbs Also See for GV-DT1:
Table of Contents

Advertisement

SAFETY
PRECAUTIO N S
WARN IN G:
TO PREVEN T FIRE O R SH O CK
H AZARD , D O N O T EXPO SE
TH IS U N IT TO RAIN O R
M O ISTU RE.
CAU TIO N
When you are not using the unit for a long
period of time, it is recommended that you
disconnect the power cord from the mains
outlet.
Dangerous voltage inside. Refer internal
servicing to qualified service personnel. To
prevent electric shock or fire hazard, remove
the power cord from the mains outlet prior to
connecting or disconnecting any signal lead
or aerial.
The STANDBY/ON
completely shut off mains power to the unit, but
switches operating current on and off. "
shows electrical power standby and " " shows
ON.
The mains outlet shall be installed near the unit
and shall be easily accessble.
N O TE:
The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of the main
unit.
Downloaded from:
button does not
https://www.usersmanualguide.com/
IM PO RTAN T (for U . K. owners)
Connection to the mains supply in the U nited
Kingdom.
D O N O T cut off the mains plug from this
equipment. If the plug fitted is not suitable for
the power points in your home or the cable is
too short to reach a power point, then obtain a
proper safety approved extension lead/adapter
or consult your dealer.
BE SU RE to replace the fuse only with an
identical approved type, as originally fitted,
and to replace the fuse cover.
If nonetheless the mains plug is cut off remove
the fuse and dispose of the plug immediately,
to avoid a possible shock hazard by inadvert-
ent connection to the mains supply.
If this product is not supplied fitted with a
mains plug then follow the instructions given
below:
D O N O T make any connection to the Larger
Terminal coded E or Green.
The wires in the mains lead are coloured in
accordance with the following code:
If these colours do not correspond with the
terminal identifications of your plug, connect
as follows:
"
Blue wire to terminal coded N (Neutral) or
coloured Black.
Brown wire to terminal coded L (Live) or
coloured Red.
If in doubt — consult a competent electrician.
1
EN
Blue to N (Neutral) or
Black
Brown to L (Live) or
Red

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gv-dt1e

Table of Contents