Table of Contents
Advertisement
22
EN
REQ UIRED HARDWARE
q Bi-Directional 25-pin printer interface
q 486DX2 or higher CPU
O PERATIN G EN VIRO N M EN T
q Personal computer with Microsoft * Windows * Operating System Version 3.1
(also verified to run with Microsoft Windows 95)
* Microsoft and Windows are trademarks of the Microsoft Corporation registered in the
United States and other countries.
q 16 MB RAM or more
q At least 8 MB available hard disk space
q Colour display capable of handling at least 640 x 480 dots and 256 colours
(Recommended: true colour 24-bit)
q Windows -compatible mouse connected to PC
q 3.5" 1.44MB floppy disk drive
q CD-ROM drive
THIN GS YO U'LL N EED IN ADDITIO N THE PRO VIDED
ACCESSO RIES
A commercially available printer cable (3 m or shorter). Use one capable of all-pin wiring.
Some PCs are compatible only with a particular design of printer cable. Consult your dealer
before purchasing a cable.
When using a printer cable which is over 3 m long, a transmission error may occur.
(Example)
Downloaded from:
36-pin male
25-pin male
M icro ribbon
D -sub
https://www.usersmanualguide.com/
INTRODUCTION
Advertisement
Table of Contents
