Replacing Hepa Exhaust Filter; Changing Dust Bag - Panasonic QuickDraw MC-V7388 Operating Instructions Manual

Panasonic mc-v7388: user guide
Table of Contents

Advertisement

HEPA
Exhaust Filter
and Frame
Filtro de escape
HEPA y el marco
Filtre d'évacuation
(HEPA) et cadre
Retainers
Lengüetas
Taquets
Always operate vacuum with genuine Panasonic Type U3 Standard or U6 Electrostatic dust
bags installed. Panasonic dust bags may be purchased through any authorized Panasonic
dealer or ordered from service company.

Replacing HEPA Exhaust Filter

Dust
Cover
Cubierta
de polvo
Couvercle
)
OLS
(TO
OR
FLO
E
BAR
PET
CAR

Changing Dust Bag

➢ ➢ The HEPA exhaust filter removes dirt
from recirculated air.
➢ ➢ Check filter when installing a new
dust bag.
➢ ➢ If dirty, remove filter from bottom of
the dust cover by pulling straight up
on retainers on frame. Lift one side at
a time.
➢ ➢ Place new filter in dust cover DO
NOT CLEAN WITH WATER*.
➢ ➢ Place filter in frame and install in
dust cover. For proper operation the
white side must face dust cover grill.
*Filter cannot be cleaned and should be
replaced at least once each year.
1)
➢ ➢ Pull outward on dust cover grip to
remove the dust cover.
2)
➢ ➢ Remove dust bag by grasping
cardboard portion and pulling out.
- 28 -

Advertisement

Table of Contents
loading

Table of Contents