Table of Contents
Advertisement
Low
Corto
Bas
➢ ➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum.
➢ ➢ During this time the headlight remains on.
➢ ➢ To correct problem, turn off and unplug vacuum, remove clogs, and/or clean/replace
filters.
➢ ➢ Replace full bag if necessary.
➢ ➢ Wait approximately thirty (30) minutes, plug vacuum in, turn on to see if thermal
protector has reset. Thermal protector will not reset if vacuum is not turned off even
if vacuum cools down.
Variable Power Control
High
Alto
Haut
F U L L
V A C
G A U G E
Lock into MAX
Cerrado al posición
MAXIMO
Verrouiller à MAX
Thermal Protector
➢ ➢ This Vacuum cleaner is equipped
with a variable power control which
will allow you to select any cleaning
power from low to high.
➢ ➢ Set to LOW power for delicate fabrics
such as draperies. Set to MAX or full
power for more conventional carpet-
bare floor cleaning.
➢ ➢ To set to MAX or full power move the
control knob fully to the right. When
MAX is reached you will feel the
control knob snap into the locked
setting.
- 20 -
Advertisement
Table of Contents
