Huawei SUN2000-50KTL-ZHM3 User Manual page 43

SUN2000-(50KTL-ZHM3, 50KTL-M3)
User Manual
No.
B
C
D
E
F
G
Note [1]: For details about meter operations, see
Sensor Quick Guide
Smart Power Sensor Quick
mA) Smart Power Sensor Quick Guide
Smart Power Sensor User Manual
Note [2]: SUN2000MA V100R001C20SPC116 and later versions can connect to
DTSU666-HW and YDS60-80 power meter.
Note [3]: SUN2000MA V100R001C20SPC116 and later versions can connect to
optimizers. For details about how to operate optimizers, see
Optimizer User
The cable specifications must comply with local standards. Device damage caused
by using cables with incorrect specifications will not be covered by the warranty.
Issue 05 (2023-02-28)
Component Description
AC switch To ensure that the inverter can be
safely disconnected from the power
grid when an exception occurs,
connect an AC switch to the AC side
of the inverter. Select an
appropriate AC switch in
accordance with local industry
standards and regulations. Huawei
recommends the following switch
specifications:
Recommended: a three-phase AC
circuit breaker with a rated voltage
greater than or equal to 500 V AC
and a rated current of 125 A.
Power The SUN2000 can connect to the
DTSU666-H, DTSU666-HW,
[1]
meter
YDS60-80 and YDS60-C24 power
meters.
SUN2000 Select a proper model as required.
SmartLogger SmartLogger3000
Smart Select a proper model as required.
Dongle
Smart PV MERC-1300W-P, MERC-1100W-P
[3]
optimizer
YDS60-80 Smart Power Sensor Quick
,
Manual.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
[2]
Guide, DTSU666-H and DTSU666-H 250 A (50
DTSU666-H 100 A and 250 A
and
.
5 Electrical Connections
Source
Prepared by users
Purchased from
Huawei
Purchased from
Huawei
Purchased from
Huawei
Purchased from
Huawei
Purchased from
Huawei
DTSU666-HW Smart Power
Guide, YDS60-C24
MERC Smart PV
35