Junker JI LT Series Information For Use page 10

Table of Contents

Advertisement

en Cookware test
11.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, press and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
⁠   or 
to view the individual displays.
12  Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. → Page 9
12.1 Carrying out Cookware test
At room temperature, place the cookware with ap-
1.
prox. 200 ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
Call up the basic settings and select ⁠   ⁠   ⁠ .
2.
3.
Touch  ⁠   or  ⁠ . The
zones.
a The function has been activated.
a After 10 seconds, the result appears in the cooking
zone displays.
13  Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
13.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, a retailer or the online
shop www.junker-home.info.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Never use unsuitable cleaning products.
Do not use cleaning products while the hob is still
hot. This may cause marks on the surface.
Unsuitable cleaning products
¡ Undiluted detergent
¡ Detergent intended for dishwashers
¡ Abrasive cleaning products
10
⁠ .
Display
⁠ ⁠ .
⁠ .
⁠   display flashes in the cooking
Touch
3.
a
and
light up alternately as well as  as a preset
value.
Touch
4.
for
pears.
Use
or
5.
Touch and hold
6.
a The settings are saved.
11.3 Exiting the basic settings
To exit the basic settings and and switch off the
hob, touch
12.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
The cookware is taking longer to heat up than ex-
pected and cooking is not progressing as well as
it ought to.
The cookware is heating up correctly and cooking
is progressing well.
Note: If you have any unfavourable results, reposition
the cookware on a smaller cooking zone, if available.
Touch  ⁠   or 
¡ Aggressive cleaning products such as oven spray
or stain remover
¡ Abrasive sponges
¡ High-pressure or steam jet cleaners
13.2 Cleaning the hob
Clean the hob after every use to stop cooking residues
from getting burnt on.
Requirement: The hob must be cold. Do not allow the
hob to cool down if it has sugar stains, rice starch,
plastic or aluminium foil on it.
Remove heavy soiling using a glass scraper.
1.
Clean the hob with a cleaning agent for glass
2.
ceramic.
Follow the cleaning instructions on the packaging of
the cleaning agent.
Tips
¡ You can achieve good cleaning results using a
special sponge for glass ceramic.
to access the basic settings.
repeatedly until the desired setting ap-
to select the required value.
for four seconds.
⁠ .
to activate the function.

Advertisement

Table of Contents
loading

Table of Contents