Carpet-Bare Floor Selector; Vac Gauge - Panasonic MC-V5278 Operating Instructions Manual

To Clean Bare Floor Or Use Tools
Para aspirar sobre un suelo
sin alfombra o usar los accesorios
Position plancher ou avec accessoires
To Clean Carpet
Para aspirar sobre
una alfombra
Position tapis

Carpet-Bare Floor Selector

Carpet-Bare
Floor Selector
Selector carpet-
bare floor
Selecteur
tapis/plancher

Vac Gauge

- 18 -
➢ ➢ Selector should be placed in BARE
FLOOR (TOOLS) position when using
cleaner on bare floors and when
using tools.
➢ ➢ The agitator does not rotate in the
BARE FLOOR (TOOLS) position.
➢ ➢ Selector should be placed in
CARPET position when using cleaner
on carpeted floors.
➢ ➢ For longer belt life, turn vacuum off
before moving selector.
➢ ➢ Otherwise, take care when selecting
either position to ensure selector is
pushed fully and quickly as possible
to desired position.
➢ ➢ Failure to do so can cause belt to rub
on selector shaft and result in belt
becoming hot and creating a burning
rubber smell.
➢ ➢ The vac gauge detects when dust
bag needs changing or the vacuum is
clogged.
➢ ➢ Check dust bag when vac gauge
indicates FULL.
➢ ➢ If dust bag is full, change bag
according to CHANGING DUST BAG
section.
➢ ➢ If dust bag is not full, check for clogs
according to REMOVING CLOGS
section.