International CQ-5400U Operating Instructions Manual page 20

❏ Installation Procedures
When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure
●
your hands and fingers.
We strongly recommend you to wear gloves for installation work to protect yourself from injuries.
●
Note: Disconnect the cable from the negative (–) battery terminal.
1. Secure the Mounting Collar
Insert Mounting Collar
screwdriver.
2. Securre the rear of the unit.
a) Insert Power Connector to the unit.
b) Check the electrical connection by referring to this operating instructions.
c) Insert the unit into Mounting Collar
19
.
into the vehicle's dashboard, and bend mounting tabs out with a
and push it in until "click" is heard.