Table of Contents
Advertisement
Installation Guide
This installation information is designed for experienced installers
and is not intended for non-technical individuals. It does not
contain warnings or cautions of potential dangers in attempting to
install this product.
Any attempt to install this product in a motor vehicle by anyone
other than qualified installer could cause damage to the electrical
system and could result in serious personal injury or death.
❏ Overview
This equipment should be installed by a
professional. However, if you plan to install this
unit yourself, your first step is to decide where to
install it. The instructions in these pages will
guide you through the remaining steps: (Please
refer to "WARNING" statement above).
Identify and label the vehicle wires.
●
Connect the vehicle wires to the wires of the
●
power connector.
Install the unit in the dash.
●
Check the operation of the unit.
●
If you do encounter problems, please consult
your nearest professional installer.
Caution: This unit will operate with a 12 volt DC
negative ground auto battery system only. Do
not attempt to use it in any other system. Doing
so could cause serious damage.
Before you begin installation, look for the following
items included in the packing with your unit.
Installation Hardware ...... Needed for in-dash
●
installation
WARNING
❏ Installation Hardware
No.
Mounting Collar
Item
Diagram
Qty
1
18
Advertisement
Table of Contents
