Removing Clogs - Panasonic MC-V415 Operating Instructions Manual

Hose
Tuyau
Manguera
Tabs
Languettes
Langüetas
Motor Protector
Protecteur du
moteur
Protector de
motor
Short Hose
Tuyau court
Manguera
corta
Hose Fitting

Removing Clogs

Suction
Inlet
Entrée
d'aspiration
Abertura de
aspiración
Hose
Tuyau
Manguera
Raccord du tuyau
Conexión
para manguera
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bin. If the hose
should become clogged:
Unplug vacuum cleaner.
Press two tabs and pull open suction
inlet and check for clogging.
Disconnect hose from short hose and
check the hose for clogging.
Plug in vacuum cleaner and turn on.
Stretch hose in and out to remove
clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Remove lower plate.
Remove short hose from nozzle by
lifting straight up.
Inspect hose end and clear any
obstructions.
Reinstall short hose.
Reinstall lower plate.
- 36 -