AEG SteamCrisp 7000 Series User Manual page 24

Clean all accessories after each use and let them dry. Use only a microfibre cloth with warm
water and a mild detergent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.
Accessories
11.2 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is cold.
Step 2 Carefully pull the shelf supports up
and out of the front catch.
Step 3 Pull the front end of the shelf support
away from the side wall.
Step 4 Pull the supports out of the rear
catch.
Install the shelf supports in the opposite sequence.
11.3 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
Turn off the oven and wait until
it is cold.
Do not fill the water tank during cleaning. It restarts the cleaning cycle.
Step 1 Turn on the oven.
Step 2
Press:
Step 3 Put the baking tray on the first shelf position to collect water from the water tank.
- press to start water tank emptying.
Step 4 When the tank emptying ends remove the baking tray and removable shelf supports. Wipe the oven
cavity and the inner door glass with a soft cloth. Press:
Step 5 Select the cleaning mode.
Option
24 ENGLISH
Before the Pyrolytic Cleaning:
Remove all accessories.
/ Cleaning.
CAUTION!
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
.
Cleaning mode
a mild detergent.
Duration