JVC GR-AX760 Instructions Manual page 39

ORIGINAL TAPE (camcorder)
EDITED TAPE (VCR)
Downloaded from: https://www.usersmanualguide.com/
1 3 2
IN OUT IN OUT IN
EDIT STOP
SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL
AV OUT
Player (JVC VCR)
To
Editing cable
R.A. EDIT
(3.5 ø -3.5 ø,
provided)
AV IN
Recording deck
To
PAUSE IN
RM-V704U
(provided)
AUTOMATIC EDITING TO VCR
ENGAGE VCR'S RECORD–PAUSE
OUT
MODE
1
Point the remote control toward the VCR's infrared
sensor and press VCR REC STBY, or manually
engage the VCR's Record-Pause mode.
BEGIN AUTOMATIC EDITING
2
Press EDIT on the camcorder, and the previously
selected scenes are copied to the VCR in the
specified order.
END AUTOMATIC EDITING
3
When all selected scenes have been copied, the
camcorder and VCR enter the still or pause mode.
Press STOP on both units.
•When finished editing, be sure to disconnect the
editing cable and the audio/video cable.
NOTES:
● If you performed step 1
("MAKE CONNECTIONS"), keep the remote control
pointed at the VCR during editing.
● The on-screen display only appears while the
camcorder searches for each scene.
● There may be noise at in- or out-points on the edited
tape with certain VCRs.
Using the RM-V704U remote control, it is also possible to
perform deck-to-deck Random Assemble Editing. The
playback deck must be an R.A. Edit-capable JVC VCR. The
recording deck can be...
a VCR other than JVC, or
a JVC VCR which has neither a Remote PAUSE nor an
R.A. EDIT connector
How to use:
— Connect the playback deck and RM-V704U as shown
on the left.
— Set the RM-V704U to correspond to the brand of the
recording deck. ( pg. 37)
— For Random Assemble Editing procedure, please refer to
the instruction manual of the JVC VCR you are using as
the playback deck.
Notes:
RM-V704U cannot be used to control the playback deck.
RM-V704U is capable of controling basic operations of
the recording deck. While pressing VCR CTL, press PLAY,
STOP, PAUSE, FF or REW for these functions. (Not
possible with some brands and models). Other buttons
cannot be used.
To put the recording deck in the Record-Pause mode, use
the controls on the recording deck itself.
39
EN
C on page 37