Citronic Limited User Manual About Citronic Thank you for choosing Citronic and the CD-1 Professional DJ Dual CD Player. You have joined a discerning group of DJ’s and operators who value design integrity, quality and state of the art facilities.
Your Serial Number CAUTION: TO REDUCE THE RISK OF ELECTRIC Please, record and retain serial number of your CD-1 SHOCK, DO NOT REMOVE THE COVER (OR Dual CD Player shown on the rating label. BACK). THERE ARE NO SERVICEABLE PARTS INSIDE.
Citronic Limited User Manual Preparations Checking the Contents Check that the carton contains the following items: Main unit 2) Control unit 3) Operating instructions (this booklet) 4) Pair of RCA pin cord. 5) Control cords Installing the Unit Mount the unit onto your console or rack with 19"...
Citronic Limited User Manual Note On Use Allow for sufficient heat dispersion when installed on a rack. « Handle the power cord carefully and hold the plug when unplugging the cord. « Keep the set free from moisture, water, and dust.
Page 7
Citronic Limited User Manual Control Unit (1) OPEN/CLOSE (Open/Close Button) (11) SGL/CTN (Single/Continuous Button) (2) TIME (Time Button) (12) CUE (Cue Button) (3) LCD (Liquid Crystal Display) (13) PROGRAM (Program Button) (4) A-B Repeat (Loop button) (14) B.SKIP (5) PITCH - (Pitch Bend - Button)
Citronic Limited User Manual PITCH + Button Main Features and Functions The CD speeds up while this button is pressed, Main Unit Front Panel release the button to return to the original BPM. PITCH (Pitch Button) POWER (Power ON/OFF Switch)
Page 9
Citronic Limited User Manual 20 Remote Start Via the Control socket, the respective CD player can be remotely controlled. If you are using a mixer with fader start-function connect the player with the Control Out-socket. Please note that these sockets must never be connected with any voltage.
Page 10
Citronic Limited User Manual Ø Press the PLAY/PAUSE button during the pause Operating Instructions or cue condition to start playback, the PLAY indicator lights. Opening and Closing the Disc Holder Ø The point at which playback starts, is Ø Turn the unit power on. Press the OPEN/CLOSE automatically stored in the memory as the CUE button to open the disc holder.
Page 11
Citronic Limited User Manual Stopping Playback There are two ways to stop playback. Press the PLAY/PAUSE button during playback to pause at that point. Press the CUE button during playback to return to the cue point and enter pause condition. (Back...
Page 12
Citronic Limited User Manual Auto Cueing Ø The CD player will AUTO-CUE Track 1 and any subsequent track skip, either in Single or Continuous play mode Ø AUTO-CUE finds the start of the sound on track 1 or subsequent track skip. This will be noticed in...
Page 13
Citronic Limited User Manual 12. Frame search Ø Frame search is a function for monitoring the sound at a certain section of the disc and manually changing the cue position. This allows accurate cue points to be selected. Ø Press the while in pause or cue mode to begin searching.
Page 14
Citronic Limited User Manual 15. Pitch – (BPM) (Matching the Beats Per Minute) There are two tools available for matching the BPM of the two CDs: Use the pitch slider to adjust the BPM. Use the PITCH BEND buttons to change the BPM temporarily.
Citronic Limited User Manual 16. Program play 18. Relay Press the PROGRAM button, the player will enter the program mode and the CD will stop Insert CDs into both sides of the unit. rotating. Press the “RELAY” button to activate.
Control unit: 2 kgs Power supply: 115 / 230V AC, 50 / 60Hz Power consumption: N.B. Citronic reserves the right to alter these specifications at any time and for any reason without liability. Errors and Omissions Excepted. Page 16 of 18...
Page 17
If you have need to contact us about the operation or servicing of your CD-1 Professional DJ Dual CD Player please write, telephone or e-mail to the address on the back page: -...
Need help?
Do you have a question about the CD-1 and is the answer not in the manual?
Questions and answers