The Garden Gym Dip station Installation Manual

NB- Before you start!

Ensure that the first pull up bar is solid. You will connect the
monkey bar to the original pull up bar which will can create
movement in the foundations. We recommend that you let the
pull up bar concrete harden before starting to add the monkey
bar. Depending on the mix you used this would be between 2-4
Dip station
Installation guide
hours.

General guidance

These instructions are provided as a guide to help you
install your equipment. Depending on the type of ground
conditions it may be necessary to modify the installation.
If you are unsure, please consult a qualified professional or
contact the Garden Gym Team. The installation should be
carried out by 2 people. Before digging you must ensure
that there is no risk of encountering services such as
drains or electricity.
The Garden Gym does not accept any liability in relation
to the installation and subsequent use of the gym
relating to incorrect or improper installation.

You will need

Spade / hole diggers / safety gloves / step ladder / tape /
measure / level / 2 x 19mm socket drivers / hammer

Post mix

Between 1 and 2 bags per post, depending on
the size of your holes and ground conditions