I/Nvr21-P-I2/Nvr21-8P-I/Nvr21-8P-I2/Nvr21-S3/Nvr21-P-S3/Nvr21-8P-S3 - Dahua NVR52-EI Series User Manual

● Shut off the power before you replace the HDD.
● Use the dedicated SATA HDD for monitoring recommended by the HDD manufacturer.
● You can see the Appendix for HDD space information and recommended HDD brand.
3.3.1
NVR41-4KS2/NVR41-P-4KS2/NVR41-8P-4KS2/NVR41-4KS2/L/NVR41
-P-4KS2/L/NVR41-8P-4KS2/L/NVR21-4KS2/NVR21-P-4KS2/NVR21-8
P-4KS2/NVR21-W-4KS2/NVR21-I/NVR21-I2/NVR21-P-I/NVR21-P-I2/
NVR21-8P-I/NVR21-8P-I2/NVR21-S3/NVR21-P-S3/NVR21-8P-S3
Background Information
Connect cable and then secure the HDD on the NVR if it is not convenient to connect the HDD data
cable and power cable at first.
Procedure
Step 1 Loosen the screws of the bottom of the chassis.
Step 2 Place the HDD in accordance with the four holes in the bottom.
Figure 3-2 Lossen screws
74
User's Manual