Philips 43BDL4550D User Manual page 28

43BDL4550D_50BDL4550D_55BDL4550D
Network Settings:
1. Switch the router on and enable its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3. Press [ ] HOME button on the remote control, then select
Connect to network
4. Select
5. Wait until this display finds the network connection.
6. If the "End User License Agreement" window prompts, accept the agreement.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
, then press [ ] button.
Setup
.
16